TheOldHokie's latest activity
-
TheOldHokie replied to the thread PowerBeyond M8200.Have you removed the joystick? Need better pics of the ends of the two hoses going to the underside of the tractor.. Dan -
TheOldHokie replied to the thread L4400 fel not working.That is bad news. I would say very bad news. You should be getting just under 9 GPM. The silver lining is you now have a clear problem...
-
TheOldHokie replied to the thread Front loader for a B7200.Now your 3pt is underpowered. Why did you decide to set the loader relief lower than the tractor? Dan
-
TheOldHokie reacted to PoTreeBoy's post in the thread BX23S Loader Lift Issue & hydraulics getting hot – Seeking Diagnosis Help with
Like.
Remove and recouple that connector. Make sure it is completely seating. You may need to replace the coupling. -
TheOldHokie replied to the thread BX23S Loader Lift Issue & hydraulics getting hot – Seeking Diagnosis Help.That's the loader "power beyond" hose. If its not fully connected you will get your symptoms. Dan
-
TheOldHokie replied to the thread Rear axle broke right inside cover.Personally I never got past that part although I might be kind and call it "aggressive operating techniques." Dan
-
TheOldHokie replied to the thread Which hydraulic IN hose to buy for my B7500 tractor ?.You can buy a premade hose assembly with straight JIC swivels from Surplus Center for $14 and a 90 degree JIC swivel adapter for $4...
-
TheOldHokie replied to the thread Rear axle broke right inside cover.Sorry gor my lack of clarity. I was not talking about torsion. I was suggesting there adfitional ways to load that shaft. Dan
-
TheOldHokie replied to the thread Rear axle broke right inside cover.It may not be that simple. You can do crazy things with backhoe hydraulics. Dan
-
TheOldHokie replied to the thread BX23S Loader Lift Issue & hydraulics getting hot – Seeking Diagnosis Help.Sounds to me like you have a problem on the pressure side. What is the "BH bypass hose:? Dan
-
TheOldHokie replied to the thread Which hydraulic IN hose to buy for my B7500 tractor ?.Your local Fleetpride can do it while you wait but they are pricey. Assuming its a 36" long 3/8*;hose with JIC-08 swivels Discount...
-
TheOldHokie replied to the thread L4400 fel not working.Pressure is good but flow should be double that. Remeasure flow at max engine RPM.
-
TheOldHokie replied to the thread Which hydraulic IN hose to buy for my B7500 tractor ?.Hoses are commodity parts. That hose has JIC female swivel ends. Take it to any hose shop and they cam make one. Dan
-
TheOldHokie replied to the thread L4400 fel not working.The loader valve is the part with the joystick. Dan
-
TheOldHokie replied to the thread Rear axle broke right inside cover.Is that your official ID? We can't seem ti get something that basic from the gentleman that started this discussion Dan