TheOldHokie's latest activity
-
TheOldHokie replied to the thread Snowblower Hydraulic Chute movement question.No and thats an unfortunate design chioce on Kubota's part. I think most people would find it more natural and convenient if normal... -
TheOldHokie replied to the thread Snowblower Hydraulic Chute movement question.Should not be a problem on a LX. Boom spool on most Kubota loader valves is serial and when shifted feeds the bucket spool just fine...
-
TheOldHokie replied to the thread M7040 3 point weakens throughout the day.The PS has its own pump and is a different circuit. I will have to do a little research on the M7040 plumbing to see where to go next. Dan
-
TheOldHokie replied to the thread Hydraulic Controller.I told you exactly what those ports are. There are two P ports - both SAE-10. You can use either one and put the steel plug in the one...
-
I think that engine is rated around 2700 RPM at 540 PTO. What is the transmission in when mowing? You have high, medium, low....then...
-
TheOldHokie replied to the thread 2008 L3240 HSTC.Have you read and digested the HST Plus section of the Operator's msnual? Dan
-
TheOldHokie replied to the thread 2008 L3240 HSTC.I am not talkkng about the injection system. I am talking about HST Plus which is a computer controlled (ECU) transmission and throttle...
-
TheOldHokie replied to the thread 2008 L3240 HSTC.That engine and transmission is computer controlled. Start by getting a copy of the owners manual and reading about the different...
-
TheOldHokie replied to the thread Hydraulic Controller.Remind me again - why are you replacing this valve? Dan
-
TheOldHokie replied to the thread Hydraulic Controller.There are no NPT ports on that valve. Everything is SAE oring boss - DO NOT USE SEALANT. Dan
-
TheOldHokie replied to the thread Hydraulic block outlet B3350.Hook it up and go. When digging with the hoe the 3pt lever/valve MUST be kept in the neutral position. Dan
-
TheOldHokie replied to the thread Hydraulic Controller.Lets use the actual labels on the valve. There are two ports marked P. They are both pressure in from the tractor. You can use either...
-
TheOldHokie replied to the thread B2650 3pt PTO driven leaf mulcher / vacuum.I have one complete with a ragged out ho-made trailer and vacuum hoses. Cheap!!! Dan
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.The knob adjusts the speed at which the lift drops when you move the 3pt control lever to the lower position. It has no effect on lift...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.The main problem was lack of documentation for both the valve abd outlet block. Kubota has historicaly done a poor job with...
-
