TheOldHokie's latest activity
-
TheOldHokie replied to the thread safety on a hill going straight up and down.[ I operate on slopes like that on a regular basis. Sooner or later you will have an "event" so i have four basic rules: Akways stay... -
TheOldHokie replied to the thread Bradco 715 front blade attachment.You are more than welcome. It was a fun puzzle. BTW - I think you will find the inlet relief on your valve is set lower than the main...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.EXACTLY!! Your valve is now plumbed with power beyond and tank returns. Dump those rear outlets and find a pernanent connection for the...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.That appears to he the power bryond outlet on your vslve. Connect it to A on the hydraulic outlet block and run OUT on the valve to the...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Please put everything back that you changed. Now do this and nothing else. Go to the rear of the tractor and disconnect the quick...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Discinnect the bittom hose from the rear remote coupler and stick it in the hydraulic oil filler. Start the tractor and see if you are...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Almost surely. That makes 9 hoses and is probably a power beyond. But that is not consistent of your description of the flow from OUT...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.No. The valve is not plumbed correctly Dan
-
TheOldHokie replied to the thread B8200 no hydraulics.Then lets stop guessing. Run your test straight from the pump. If you get 2500 PSI the pump is good. Put the outlet block back...
-
TheOldHokie replied to the thread B8200 no hydraulics.The relief valve is not in your test setup. Perhaps you should provide more details on how you conduct a pump pressure test using the...
-
TheOldHokie replied to the thread B8200 no hydraulics.How do I you explain flow but no pressure? Dan
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.You are deadheaded some where. Put the 3pt lever ALL of the way down and check ALL hydraulic functions. Then use one of your hydraulc...
-
TheOldHokie replied to the thread B8200 no hydraulics.OK. When you are getting no pressure are you getting flow? Dan
-
TheOldHokie replied to the thread What's cookin' boys?.Lemon and lime juice rule!! Dan
-
TheOldHokie replied to the thread B8200 no hydraulics.How can you connect that straight to pump? Dan