st peter's latest activity
-
SHi Folks,Stil working on the l2550 new clutch.Got different clutch and fjywheel torque specks.Manual says 17 to 20 on the clutch...
-
Sst peter replied to the thread OOPS! dual clutch l2550.Yup one or 2 turns at a time.They suppos to slide right in?
-
Sst peter replied to the thread OOPS! dual clutch l2550.Yes flywheel removed and faced.Tractor went together 2 turns on each bolt.not a slide right in.Had the tractor in neutral,started hard...
-
Sst peter replied to the thread OOPS! dual clutch l2550.
-
Sgreetings,installed a new clutch,went in after some work.Now the engine cranks real slow, not enouf to start,tried swapping battery same...
-
SGreetings,Split the unit to replace dual clutch.Went to re mate hard time ,hard to mate.2 plates with different size splines,lined up...
-
Sst peter replied to the thread B7100 Pilot Bushing Help - Grinding Gears.welcome,you don.t wanna split if you don"t have to,I split a dual clutch l2550,Having trouble mating back up,gotta go in pretty level...
-
Sst peter replied to the thread B7100 Pilot Bushing Help - Grinding Gears.
-
Sst peter replied to the thread dual clutch l2550.ok,think i got it.on the old clutch,had 2 4" guide studs on the flywheel and 4 4" bolts at the other end p plate that will go on the...
-
Sst peter replied to the thread dual clutch l2550.thanks,when i removed from the old clutch came off real easy.Come loose in the new kit.so i slid in,but no grab to anything,just...
-
Sst peter replied to the thread dual clutch l2550.
-
Schanging clutch there are 6 bolts on the p plate facing trans that don't grab on anything?supposto to float? confused