Russell King's latest activity
-
RRussell King replied to the thread Hot when mowing - B2400 - Cools off if I stop moving (even with blades going).If it was me… If you drain the coolant I would probably change the thermostat. For sure I would remove the radiator and clean it well...
-
RRussell King replied to the thread Cracked Fuel bowl for L1802DT and PTO stuck on.I think you can remove the top of the transmission and remove it along with the levers. Probably the shift lever has slipped out of a...
-
RRussell King replied to the thread quick attach 3 point.okay I found a manual and the hook is really NOT involved in lifting the implement. See the manual photo below
-
-
RRussell King replied to the thread quick attach 3 point.I disagree that the hook is not used. Look at the video above. Start at about 1:13 and watch him install the pin and bushing. He then...
-
-
RRussell King reacted to Hugo Habicht's post in the thread Hot when mowing - B2400 - Cools off if I stop moving (even with blades going) with
Like.
The "throttle" of the engine is controlled to keep constant revs. When you are mowing the engine has to work way harder than when you... -
RRussell King replied to the thread backhoe rebuild ,start up, bleeding procedure.You can bleed if you want to but the lines and cylinders will purge out the air as you cycle them a few time each, without doing...
-
RRussell King replied to the thread quick attach 3 point.Why do you need them? The link of the mower is in the hook anyway so are they just to be sure the implement doesn’t become unattached...
-
RRussell King replied to the thread 1998 b1700.Is your tractor geared or hydrostatic transmission? Maybe update the model number in your profile? I think there are a few different...
-
RRussell King replied to the thread 1998 b1700.On my L185 the clutch switch is on the opposite side of the tractor from the pedal. There is a rod that runs through the case and...
-
RRussell King replied to the thread 1998 b1700.You may have a problem with the key switch or just the wiring to the starter. You have confirmed the starter and solenoid are both...
-
RRussell King replied to the thread 1998 b1700.Yes you can usually bypass the switches. On my L185 there is one for the clutch that is a simple plunger that is open when pedal is up...
-
RRussell King reacted to Runs With Scissors's post in the thread Damned if you do........Damned if you don't....... with Like.
From here things go pretty quick. I press in the new races for the axle bearings. Assemble the parking brakes.....It sure will be...
-
RRussell King replied to the thread personal protection in the heat, ticks, poison ivy?.You can get pants that are much better than jeans in the heat. Duluth sells some called Armachillo that look like jeans. I have tried...
-
RRussell King replied to the thread 1998 b1700.This is exactly what a bad safety switch would do. Look at any safety switch and make sure it is working. Not sure how many switches...
-
RRussell King replied to the thread Damned if you do........Damned if you don't........Why don’t you try the torque multiplier (that I think I saw you have on a different thread)?
