Russell King's latest activity
-
RRussell King replied to the thread Damned if you do........Damned if you don't........In a pinch, a floor jack handle can make a good extension for some tool handles. The ID is too small for some things. But you really...
-
RRussell King replied to the thread L200 air cleaner.Call this salvage yard, they may be able to help with a used part but you may have to be more specific about “top part”. There seem...
-
-
RRussell King replied to the thread Smooth Trails.You might want to dump wood mulch on the trail and then smooth that out. It will keep erosion down. It will rot over time but will...
-
RRussell King replied to the thread B7800 with 600 hours over heating..There should be much more of a temperature drop. I think it should be around 80 to 100 degrees F top to bottom.
-
RI cleaned the diodes and the case, cleaned the wires, and soldered them together to ensure a good connection. It finally seems to work...
-
RRussell King replied to the thread Kubota B6000 charging problem.What got it to produce the 13.8 volts at the battery???
-
RNew news!
-
RRussell King replied to the thread B7800 with 600 hours over heating..There will be no flow when you first start the tractor. Then the thermostat will open and there will be flow but not for long. The...
-
RRussell King replied to the thread ZD326 mower deck question.I would get new washers (all for one spindle) and install them correctly oriented on the blade you have trouble with. Use a torque...
-
RRussell King reacted to ken erickson's post in the thread Bat house/kestrel nesting box pole construction critique and suggestions wanted. with
Like.
Update, Built the bases at home. I did use 4 x4's instead of 2 x 4 or 2 x 6 . All pressure treated with galvanized lag bolts and... -
RRussell King replied to the thread What loader model is this?.@dano7200 on the picture posting process… Go through the steps of getting the picture in place BUT do NOT then use the “buttons” that...
-
RRussell King reacted to whitetiger's post in the thread 2020 Kubota M6-141 initially observed low PTO speed, then engine died itself, now won't start. with Like.
Look under the RH steps; you will see a water separator, which the fuel has to pass through it before it can get to the pump. See if it...
-
RRussell King reacted to Kaptain's post in the thread 2020 Kubota M6-141 initially observed low PTO speed, then engine died itself, now won't start. with Like.
Yes, absolutely tested with the screw "A" completely off, it looked dry when taken off—with the key on and the pump humming/vibrating...
-
RRussell King replied to the thread 2020 Kubota M6-141 initially observed low PTO speed, then engine died itself, now won't start..I would take A completely off the separator and see if you can get fuel out of that line with the key turned to run position. If you...
-
RRussell King replied to the thread 2020 Kubota M6-141 initially observed low PTO speed, then engine died itself, now won't start..I treat my fuel with Stabil products but it is not for biological growth. I have not had any issues with biological growth, just rust...
