Russell King's latest activity
-
RRussell King replied to the thread What did you do to or on your Kubota today?.I know that cattle have four stomachs. I think horses have less maybe 1.5? So horses can’t digest the same things as a cow can, or at...
-
RRussell King replied to the thread 2020 Kubota M6-141 initially observed low PTO speed, then engine died itself, now won't start..I assume you ran the engine out of fuel. It could be just an empty tank, but is more likely a clog in the fuel lines or filters. Do...
-
RRussell King replied to the thread Kubota B6000 charging problem.@jesus your statement reminded me that some of the older tractors used AC voltage from the generator to directly power the headlights...
-
RRussell King reacted to #40Fan's post in the thread Need help removing this part from bushhog with
Like.
6.5 is the number you want to use. The gear ratio would be how many turns of input to number of turns on the output. -
RRussell King replied to the thread techno geeks.I have a feature on the IPhone that is something like “ignore unknown numbers”. If the call is from a number that is NOT in your...
-
RHere's the drawing from the official spec. SAE J2513. I think the slots for the pins has varied some in the past.
-
RRussell King replied to the thread Need help removing this part from bushhog.But remember, if using a torque multiplier, to reduce the input setting in accordance with the ratio of the torque multiplier! Captain...
-
RRussell King replied to the thread Bx2380 Hydraulic Quick Connect Issues.I am guessing that you replaced the top half of the blue fitting. Perhaps it is the bottom half that is leaking? You may be able to...
-
RRussell King replied to the thread B9200 3-pt controls don't work after hydraulic oil change.See post #12. Read in the manual about the use of directional valve, or just do what you are currently doing. Added on edit- that...
-
RRussell King replied to the thread L175 front split rims.Look at Messicks and find the part number of the rim. Then see if the list various models that it fits. If you can’t find that out it...
-
-
RRussell King replied to the thread B7200 HSTD AND Flail shredder.There will be some change in the feel of the tractor when using a rotating implement. They are usually fairly well balanced so you...
-
RRussell King reacted to TheOldHokie's post in the thread B9200 3-pt controls don't work after hydraulic oil change with Like.
The loader is working so its not the problem.. Dan
-
RRussell King reacted to Hugo Habicht's post in the thread Electrical problem with L1421, V2203 engine with Like.
Ok, here the solution of the fuse problem: after getting the workshop manual including schematics from the main dealer fault finding was...
-
RRussell King reacted to tootall81's post in the thread Need help removing this part from bushhog with Like.
Going with this. Soon as I put the parts puller on it, it broke the tool. Just gonna cut it off. Hopefully its not as bad getting a new...
-
RRussell King replied to the thread Need help removing this part from bushhog.Get a good wire brush and clean up the shaft, coat the shaft with an anti seize (if you want and there are no warnings in the implement...
