Russell King's latest activity
-
RRussell King reacted to drygulch's post in the thread Photo shoot anything lately? Random Photo Thread with
Like.
I love a good sunrise, but can't usually stay up that long. -
RGrowing up and on into my adult years, I operated a MF 165. A 60s model that was just a tad older than me. Once I bought my own little...
-
RRussell King reacted to Stuart_T's post in the thread Lift arms on 2350DT stuttering with auger attachment with Like.
I just looked at the original pic and yes, there is a nut each side, although I had to enlarge it to see it more clearly. Probably all...
-
RThere is one in Springfield. Will stop by Wednesday. Thanks.
-
RRussell King replied to the thread Lift arms on 2350DT stuttering with auger attachment.That is the feed back rod. I can’t be 100% sure due to the angle of the picture, but it looks like there is only one nut on that rod...
-
RRussell King replied to the thread SW MO drip irrigation supplier.Try to find a Ewing irrigation store, or try a Walmart, Home Depot or Lowe’s
-
RI ate loads of shredded wheat when I was a kid. I also learned fast that if you poured a bowl of Grapenuts cereal, to only pour half...
-
RRussell King reacted to TheOldHokie's post in the thread MX 5100 float position on rear remotes with Like.
No it wont retetrac when under an extend load. :p Just responding to Russells idea the cylinder was locked with just one end...
-
RRussell King reacted to MtnViewRanch's post in the thread MX 5100 float position on rear remotes with Like.
You would normally disconnect the rod end coupler only.
-
RHmmm... good question. I never heard it before I did this project. I think it is not used in Ireland, it is simply always too cold for...
-
RRussell King replied to the thread No work!.Here in the USA someone has decided that we can’t understand words like “heat index” so they started calling it “feels like...
-
RRussell King replied to the thread Good running to bad in an instant.You probably have a clogged tank outlet now. You can try blowing a low pressure air stream back towards the fuel tank through the fuel...
-
RRussell King replied to the thread Top & Tilt Hose Organization.If you install some 45 and or 90 degree fittings and head up then loop forward and down that may be a better route for that hose length...
-
RRussell King replied to the thread 3rd function flat face couplers and grapple.As North Idaho Wolfman stated just write the numbers down on the couplers. So you should be able to get four numbers. Take that to...
-
RRussell King replied to the thread changing my mind daily.As I understand the question, you are trying to decide between just horizontal offset and the ditch bank rotation to also angle the...