ruger1980's latest activity
-
RYour in for a lot of work! Cut off wheel on a grinder? Maybe Plasma cutter? ;)
-
Rruger1980 replied to the thread Kubota b2150 HST not working.https://www.amazon.com/M12x1-25-Banjo-Bolt-System-M12-12MM/dp/B0BDK9F2H7/ref=sr_1_8?crid=3TZ4RARWBEUL8&dib=eyJ2IjoiMSJ9.hA1qX6NPefiwYAnjU...
-
Rruger1980 replied to the thread How to start diagnosing crank-no-start on a kubota common rail diesel.As stated you will have to have Diagmaster to program the injector trim codes in the ECM. It will run without programming the new codes...
-
RWhitish usually means water. Dan
-
Rruger1980 replied to the thread Kubota b2150 HST not working.No that is case drain to the reservoir. It is very low pressure. The filter is charge oil but I don't know if there are any taps there...
-
Rruger1980 replied to the thread Kubota b2150 HST not working.Then chances are you have sufficient flow to the Hydrostatic unit. You really need to check charge pressure in neutral and when trying...
-
Rruger1980 replied to the thread Kubota b2150 HST not working.Does your power steering function properly? Doe sit steer easy and quickly or is it slow and hard to steer? If it steers fine then the...
-
Rruger1980 reacted to North Idaho Wolfman's post in the thread Hydraulic fluid in raditor. with
Like.
No path for fuel to get to cooling system either. Unless someone dumped it in the radiator. -
RI'm not hearing anything that abnormal? These IDI engines tend to sound knocky on cold starts. Try adding some stanadyne (cetane...
-
Rruger1980 replied to the thread Who makes batteries.The majority of batteries you buy from a USA distributor are made by either Clarios/JC, Exide or East Penn. My preference currently is...
-
Rruger1980 reacted to North Idaho Wolfman's post in the thread L3710 and Flail Mower Safe on Leach Field? with Like.
Humm.... I drive over mine all the time, have for 15+ years. Either all of your leach fields are really shallow or really poorly built.
-
Rruger1980 replied to the thread HST Filter over pressurized.If your filter has a bypass it is internal in the filter and only protects the media from collapse. Also if that were the issue it...
-
Rruger1980 replied to the thread HST Filter over pressurized.If it only occurs when propelling the tractor it is most likely something caught in the charge check valve seat area shown by the red...
-
-
Rruger1980 replied to the thread RGR1258 Tiller Vent Plug.Have you looked at the gasket and shaft seal at the upper input shaft bearing? Either of those could be a source of water ingress...
-
Rruger1980 replied to the thread Installing a GPS tracking device.You still need connection to a compatible mobile device to relay the information to your device. No compatible devices within the range...
