ruger1980's latest activity
-
Rruger1980 replied to the thread Installing a GPS tracking device.Yes there is no free lunch here. You either need a satellite connection, a SIM card or a Bluetooth or Wi-Fi connection to a device that...
-
Rruger1980 replied to the thread U-joint dimensions question.The method of measuring should be to the point of retention, whether that be internal or external snap rings, bolted flanges or...
-
Rruger1980 replied to the thread KX033 Excavator Flood Lamp Addon.Cabin or canopy? Are you wanting a light at the top of the operators platform or on the boom? I imagine the connector is in the console...
-
Rruger1980 replied to the thread Excessive water in fuel M7060 clogged vent possibly?.I seriously doubt your problem is condensation with that volume of water after less than a tank full of run time. Either there was till...
-
Rruger1980 replied to the thread Gotta pull the Head.i would recommend removing the injectors from the head before doing any more work on it. You should have removed them before cleaning...
-
Rruger1980 replied to the thread Is a quick hitch worth it when you have adjustable links.G 1/2 is another term for 1/2 BSPP as PF is the same as well. An easy way to put a restrictor in the circuit ids to tap the ID of the...
-
Rruger1980 replied to the thread Can you upgrade the injectors on a B1750?.It is not pressure but volume you must increase. There is an adjustment that limits the travel of the rack. By changing this it...
-
Rruger1980 replied to the thread Can you upgrade the injectors on a B1750?.Fuel delivery is controlled by the injection pump not by the injectors.
-
Rruger1980 replied to the thread Headlight Wiring Harness Question.The wires look light blue and black in the pics so should be air filter lamp. Easy enough to check, short the wires together and look at...
-
Rruger1980 replied to the thread Headlight Wiring Harness Question.air filter restriction switch
-
Rruger1980 replied to the thread How long do you guys wait after rain to brush hog with AG tires.Looks a lot like home LOL
-
ROuch that is bad. Hope the crank can be cleaned up, but I wouldn't count on it.
-
Rruger1980 replied to the thread Gotta pull the Head.Can you send pics of the cylinders? I would try to avoid mulling the pistons unless absolutely necessary. I would clean, disassemble...
-
-
Rruger1980 replied to the thread Pinhole leak in metal hydraulic line.You will see oil under high pressure and velocity coming from a pin hole leak foam like that. As far as fixing the best solution as...
