PoTreeBoy's latest activity
-
PUpdate. Well after three sets of seals the leak was actually worse than before, It was about 1/2 gallon every hour. Upon disassembly the...
-
PPoTreeBoy replied to the thread Looking for Row Crop Tire Sizes for M8560.I think @eserv was the original poster of this data...
-
PPoTreeBoy replied to the thread Bad Welds?.MIG requires clean metal. That shop may not remove the mill scale before welding.
-
PI grew some poblanos last year and they were sooooo hot that they all went in the compost pile. Us old people can't take hot anymore...
-
PPoTreeBoy replied to the thread What's cookin' boys?.Show off! You need to start growing poblano peppers and dry them for anchos. Makes yummy, no powder, chili.
-
PPoTreeBoy replied to the thread Grease fitting.Looks like you've lost a retaining clip off that pin. If the grease fitting is broken, it'll be better to remove the pin and fix it...
-
PPoTreeBoy replied to the thread PTO ON A 3560.2700
-
PPoTreeBoy reacted to TheOldHokie's post in the thread Pinhole leak in metal hydraulic line with
Like.
Absolutely!!!. If as I syspect its on the loader likely 1/2" tube. Bottom line is this is not a diffucult or expensive repair - the... -
PPoTreeBoy replied to the thread Pinhole leak in metal hydraulic line.I'd just caution OP to measure that hard line before ordering parts.
-
PPoTreeBoy replied to the thread Pinhole leak in metal hydraulic line.Another option is to use a compression to JIC adapter, then have a new hose made with a long 90° JIC fitting on the end.
-
-
PPoTreeBoy replied to the thread Pinhole leak in metal hydraulic line.Here's one possibility. Use a long elbow and a compression adapter screwed together. The long elbow would give you something to clamp...
-
-
PPoTreeBoy replied to the thread Gotta pull the Head.You may want to check the piston deck height before you pull them, in case a rod is bent.
-
PPoTreeBoy reacted to jaxs's post in the thread What did you do to or on your Kubota today? with Like.
I'll see your Bradford Pears:mad: and raise 2 Mulberries🤬 and a Cottonwood.🥵
-
PPoTreeBoy replied to the thread Looking for Row Crop Tire Sizes for M8560.There are also some options for narrower tires for the M5-091N narrow model, but I'd check the rolling circumference, since I'm not sure...
