PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread L3540 will not start. Fuel issue.If you got stuff out of the fuel line, I'd recommend using some algaecide and possibly some fuel conditioner, Power Service or equal, as...
-
PPoTreeBoy replied to the thread Pinhole leak in metal hydraulic line.So that white stuff is foam from the oil? How long has it been since the oil was changed? I like J B Weld, but I think you're wasting...
-
PPoTreeBoy replied to the thread Looking for Row Crop Tire Sizes for M8560.The front-to-rear axle ratio on the M8560 is 1.405, unlike the 7060 and 6060. The M5-091 has the same hub dimensions and axle ratio as...
-
PPoTreeBoy replied to the thread Fuel Problem 2012 L3940HST 40HP.Have you followed the procedure below? If you don't, any air has to work it's way through the injection pump, down the injector lines...
-
-
PPoTreeBoy replied to the thread bx24 loader will not hold position.Does the backhoe function correctly?
-
PPoTreeBoy replied to the thread What did you do to or on your Kubota today?.Down here on the lower end of the country, the Bradford pears:mad: have bloomed and almost leafed out, the forsythia, red buds and...
-
PHad a small pin hole leak on hard line going to steering box on B20. Disassembly would have been very involved. Took a chance to mig...
-
PPoTreeBoy replied to the thread L3240 HST leak.Sorry to hear about your health issue. Sounds like the basic problem with your tractor was low fluid. The fluid, especially in a hst, is...
-
PPoTreeBoy replied to the thread Pinhole leak in metal hydraulic line.First you need to measure that hard line and determine if it's metric or imperial. That fitting and hose appear to be NPT, 1/4 or 3/8"...
-
PPoTreeBoy replied to the thread BX2370 PTO engaging, no power under load - I NEED HELP.* I don't see a way/port to blow air into the clutch without running the risk of blowing air into the hst, which could be detrimental...
-
PPoTreeBoy replied to the thread BX2370 PTO engaging, no power under load - I NEED HELP.Here's the one I was thinking about, 2020 and Jamaica, not PR...
-
PPoTreeBoy replied to the thread BX2370 PTO engaging, no power under load - I NEED HELP.Several years ago, a guy in PR or somewhere offshore had a similar problem with his BX, don't recall the exact model. Some of them have...
-
PPoTreeBoy replied to the thread M62? M59? Or something else.Your uses, except snow handling, sound close to mine. I'd recommend planning for * 6 or 7' brush cutter, or flail * Back blade or box...
-
PThe seal kit part number for a BX2761 angle cylinder is 70001-00872.
-
PPoTreeBoy replied to the thread 2015 Kubota M7060 loosing power after about an hour of use...I think possibly related to PSB-2021-007-E-R1.Im pretty sure you'll have to take it to the dealer to have the replacement injectors registered in the ECU.
