PaulL's latest activity
-
PPaulL replied to the thread 3302 Vs. 2501 (first tractor).I recently got an MX, 52hp. That's a good size for mowing fields. I got a 2m (6 foot) flail, which does a good job of taking the top out...
-
PPaulL replied to the thread Kubota L4310 HST with Cab under 2,000 hours. Is it worth buying?.I wouldn't have thought Kubota was obsoleting parts on a 25 year old machine? They tend to have old new stock for a long time. And a lot...
-
PPaulL replied to the thread The HST or the Direct Trans - mainly mowing, but...?.This is true as compared to a shuttle, although I don't love shuttles either. But in a 25 - 39hp Kubota, there aren't any shuttles to...
-
PPaulL replied to the thread The HST or the Direct Trans - mainly mowing, but...?.HST all the way. Gear tractors, so far as I can tell, have three benefits: A little more HP to the ground. But since you're buying a...
-
Pno, I operate a Pressure Washing business in Central Florida. Water flow is king. Currently have 10.5 GPM at 3000 psi powered by that...
-
PPaulL replied to the thread Skid steer.Yes, holes and bumps are the biggest worries when running sideways on a hill. I generally find that running slower deals with most of...
-
PPaulL replied to the thread Sickle bar hedge trimmer - hydraulic flow seems problematic.OK, so I have two things to check: 1. See if I can connect just the motor hoses to the supply, and see if that goes. That checks the...
-
PPaulL replied to the thread Sickle bar hedge trimmer - hydraulic flow seems problematic.Mismatched in what way? They seemed to plug in fine, and I think my MX has standard pioneer. Although the female fittings on the tractor...
-
PPaulL replied to the thread Sickle bar hedge trimmer - hydraulic flow seems problematic.OK, a bit further research. It works partially, so I wondered whether just using it would free it up over time. Interestingly (having...
-
PPaulL replied to the thread Sickle bar hedge trimmer - hydraulic flow seems problematic.The supplier thought it would run of a remote circuit, and it has bayonets on it, which to me implies it would run from an outlet, not...
-
PPaulL replied to the thread Sickle bar hedge trimmer - hydraulic flow seems problematic.I spent time today disassembling the whole hydraulic block, and looking inside. Nothing much to learn inside there, it looked pretty...
-
-
PPaulL replied to the thread 3 point pallet forks.These are what I have. No idea where you'd get an equivalent unit in the USA, but they're Chinesium, so someone will be importing them...
-
PPaulL posted the thread Sickle bar hedge trimmer - hydraulic flow seems problematic in Implements & Attachments.I have a new MX5200. In theory it has 30lpm flow, or a bit more. I purchased a sickle bar hedge trimmer. It's a Chinese / cheap one...
-
PPaulL replied to the thread Low hour BX2350 with sweeper and rusted out salt spreader.The BX2350 was the plastic one. Probably a bonus for you given the salt spreader, and those panels look to be in mint condition, which...
-
PPaulL replied to the thread Skid steer.I'm always interested in people who find hillsides scary on their tractor. Because there's such a massive variation in what people find...
