Paul Allwood's latest activity
-
Yeah that looks pretty much like what's under my rubber boot. The top of the spools are drilled to accept the mechanism. Yours may be... -
My B7200/B1630 combo was generally fine with loaded rears and a -300# blade on the 3pt. Long objects like logs will get you in trouble...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Hugo, I'll give that a try.
-
Hello Paul, I am following your thread with great interest and I am admiring the work you are doing and what you have achieved in such...
-
Paul Allwood replied to the thread Front loader for a B7200.This afternoon I tested the loader lifting a load. I still don't have a bucket so I strapped increasing numbers of concrete sleepers to...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Dan. Makes sense.
-
It can get complicated. Generic Monoblock Valves In a typical two spool monoblock valve both spools are connected to the pressure...
-
You dont have that problem on a modern Kubota loader because the boom and bucket spools are in series. Dan
-
Paul Allwood replied to the thread Front loader for a B7200.Don't know about the simultaneous flow, I guess I can check by operating both the raise/lower and curl/dump levers together and see if...
-
-
I don't see why not -- it may end up a bit ungainly depending on how you can attach a joystick mechanism to the spool valves, but...
-
Paul Allwood replied to the thread Front loader for a B7200.Some of the things I make because I think I'll need them. Other times it's because I wonder if I can. I've zoomed in on a couple of...
-
That works in theory... With the low flow rate from the pump I find I can only get two functions to work at part flow on each --...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks. Yeah, dodgy operator. Planning on the level bottom of the bucket being able to be about 4" below ground level. Haha - I'll be...
-
Looks pretty good, but that poor chair may not survive too many more tests... <lol> When you are making your bucket, you will want it...
-
Paul Allwood replied to the thread Front loader for a B7200.It appears to work - I'm happy with that so far. Many thanks to everyone who has commented and offered advice so far. I haven't made a...
