Paul Allwood's latest activity
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks -
That's what I would do. However, as @TheOldHokie points out, 4 gpm in 1/4" isn't very restrictive. (In my former career, I always tended...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Dan, mine are 3/8 BSP
-
The pressure relief in the outlet block controls the maximum pump outlet pressure and protects the pump from catastrophic over pressure...
-
BTW - the supply and return ports in the outlet block are BSP thread. Dan
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Dan. Do you know if that pressure relief unloader is sufficient to protect the pump if the pump outlet is closed ? I'll also...
-
-
Number 5 is used for the pressure relief unloader and loops back to the suction side of pump. On a factory loader the loader valve tank...
-
It isnt going to matter one way or the other so do whatever makes you feel better. The ONLY thing gained from using a larger hose for...
-
Paul Allwood replied to the thread Front loader for a B7200.Help understanding hydraulic block connections.... I think I've got the hydraulic selector block connections sorted (from Kubota...
-
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks. I've only measured the OD of the main lines on the tractor as follows: - Main steel line from selector block to the back (to 3...
-
-
Yes, the lines that carry continuous flow, even when the loader is not being used. Remember, this is an open center system. What size...
-
I converted a B219 Kubota loader that was in pieces to fit my B5100. Basically I had to make a new subframe, and devise a drive for the...
-
Paul Allwood replied to the thread Front loader for a B7200.Many thanks ProTreeBoy. When you say "the main lines", do you mean the line from the hydraulic block to the valve and the line from the...
-
Paul Allwood replied to the thread Front loader for a B7200.Many thanks Barts. Did you also build your own loader ?
-
I used 3/8" line (about 4' long) from the pump to the spool valve; 1/4" lines everywhere else on my B5100 w/ a converted B219 loader...
