Old Machinist's latest activity
-
Old Machinist replied to the thread An easy 12volt power hookup..The LX3310 cab has a T type 2 pin connector behind the seat on the cup holder side. It is power on all the time and rated for 10 amps... -
-
Old Machinist replied to the thread Not Kubota Related Dwell Meter.My meter and timing light were bought in the early 70s and still work. When I was young and coming up on the farm we would clean the...
-
Old Machinist replied to the thread Adapted a Linear Actuator to a Pull Behind Spreader.The reason I made it the way I did is the actuator has built in limit switches at both ends of travel. It opens the circuit and will...
-
Old Machinist posted the thread Adapted a Linear Actuator to a Pull Behind Spreader in Fabrication & Customization.This is something I had on my mind since I got this little LX3310 cab tractor and finally got a round to it. I don't do enough seed or...
-
Old Machinist replied to the thread Not Kubota Related Dwell Meter.I still have my old points days tools but I'm not parting with them. The meter is MAC but the decal came off.
-
-
Old Machinist replied to the thread Not Kubota Related Dwell Meter.Here is an auction listing for a used Actron CP7605.
-
Are you sure you wouldn't be better off swapping the tractor for a factory-cabbed unit? You're probably looking at around $5K for a cab...
-
For Pioneer style, as best I’ve been able to tell and in my experience: 1/2” coupler: number 117 buna-n 70a (medium) hardness 3/8”...
-
Old Machinist replied to the thread O ring question.I have both of the Harbor Freight assortments, a ORFS assortment, An ORB assortment, and two different AC assortments along with some...
-
Old Machinist replied to the thread O ring question.This came up in another thread a while back and someone provided a part number. I ordered a set off Amazon and they never came. The OP...
-
Old Machinist replied to the thread Repairing sanding belts.I tried gluing some small belts together with no success.
-
Old Machinist reacted to S-G-R's post in the thread Who sells good replacement seat covers for UTVs? with
Like.
I'd say your best bet would be to try a upholstery shop. -
Old Machinist reacted to Russell King's post in the thread 2018 m5-111 lost engine power now wont start with Like.
See if the air filter is clogged with dust. See if there is a screen in front of the radiator that is covered with hay and pollen that...
-
Old Machinist replied to the thread 2018 m5-111 lost engine power now wont start.Sounds like typical fuel starvation. Make sure the fuel shutoff solenoid is opening.
-
Old Machinist reacted to jyoutz's post in the thread Cab glass protection from trimming limbs with Like.
How about some kind of shield on the mower, not the glass?
