Old Machinist's latest activity
-
Old Machinist replied to the thread Tractor for Municipal Easement Work.The John Deere 4044M would be in that price range. -
Old Machinist replied to the thread Operator seat weight maximum.Does it have room under the seat for this Air Shim?
-
Got it turned around, not a bad job but glad my hands aren't any larger . More air flowing over the engine now.
-
Old Machinist replied to the thread Fan installed backward.If it rotates counterclockwise it is indeed mounted reversed.
-
Thats what the pro’s call “plumbing diversification”. ;)
-
Old Machinist replied to the thread LX3310 Cab PTO Switch sticking when hot.I looked again and I can get eyes on it from the back. I probably won't be able to get my hands on it without removing the mower deck at...
-
Old Machinist replied to the thread LX3310 Cab PTO Switch sticking when hot.The manual says it's a switch. The PTO engages and disengages fine. The safety switch isn't closing when I disengage the PTO so it...
-
-
Old Machinist posted the thread LX3310 Cab PTO Switch sticking when hot in Service, Repair & Maintenance.The last couple of times I have mowed when I disengage the PTO and get out the engine shuts off as if the PTO is still engaged. It won't...
-
Old Machinist replied to the thread Get rid of yellow jacket nest above ground?.Also look at the videos on collecting them with a shop vac with some water in it...
-
Old Machinist replied to the thread Statement from Messicks.Anytime you get a suspect email hover your mouse pointer over the sender. That should display the sender's email address. If it doesn't...
-
Call Messick's and ask specific questions. You have a name to inquire about. Either they know what the letter is or they don't. If...
-
Old Machinist replied to the thread Get rid of yellow jacket nest above ground?.If you hadn't already dusted them you might could have found someone that collects them for making antivenom. At this point I second...
-
Old Machinist reacted to imnukensc's post in the thread Get rid of yellow jacket nest above ground? with
Like.
Wait until dark and blast a whole can of wasp and hornet spray into the nest/deck box hole. -
Old Machinist replied to the thread New LX2620 Driveshaft rattle?.My LX3310 had a horrendous vibration at the extendable links on the 3 point. I removed the ends and wrapped the arms with duct tape. Put...
-
Old Machinist replied to the thread New LX2620 Driveshaft rattle?.Good luck getting your tractor back. I let my wife drive mine and she decided I could get back on the old open station JD and mow while...
