North Idaho Wolfman's latest activity
-
North Idaho Wolfman replied to the thread First Tractor, First Leak.I use Tru-Blu, you can get it at HD. -
North Idaho Wolfman replied to the thread L3350 power issue.You replaced both before the throwout bearing issue right? It's very possible that damaged the pressure plate and disk. The only way...
-
North Idaho Wolfman replied to the thread Found : 7x16 car Hauler.Your chances of "finding" what you want is slim to none. Just a new one build the way you want.
-
North Idaho Wolfman replied to the thread D902 3-Cyl PFR-KD Zexel Injection Pump Troubleshooting.Well let me add some bad news to your plate. The "haze" you were getting had nothing to do with the fuel injection pump. If there is any...
-
North Idaho Wolfman replied to the thread L2800 HST PTO Troubles.You have a fried clutch disk or pressure plate! ;) Who told you the hydraulic pump had anything to do with the PTO operation? :unsure:
-
-
-
North Idaho Wolfman replied to the thread L3350 power issue.You need to split it and replace the clutch pack in its entirety to get it to all match up. Rightnow you have a travel clutch and...
-
North Idaho Wolfman replied to the thread B7100 Piston Installation.Things that affect the volumetric numbers and compression numbers: Doubling the injector compression gaskets (copper /clad sealing...
-
North Idaho Wolfman replied to the thread B7100 Piston Installation.Did you go to a dealer and get the head gasket, or was it online order?
-
North Idaho Wolfman replied to the thread Using backhoe to push my L2502.Yes you can damage parts leaving the transmission engaged and pushing it.
-
The feed back linkage is there to keep an implement at a constant position set by the control lever. If the implement moves down the...
-
-
North Idaho Wolfman replied to the thread L3350 power issue.The clutch is not right, it's slipping.
-
North Idaho Wolfman replied to the thread BH75 backhoe.Are you really asking this question? "I am having trouble finding seal kit for 'ol orange outrigger cylinders, 30 R x 65 B.... "...
-
-
I got the injectors bench tested. One failed so I had them rebuilt. I haven't had a chance to use it yet but it runs way smoother. I...
