North Idaho Wolfman's latest activity
-
North Idaho Wolfman replied to the thread In search of metal crank pin 1.https://trupar.com/p/kubota-construction-agricultural-metal-crank-pin-15231-28470?srsltid=AfmBOopxxB49ogiAtRE2TvjQJiUet5Cst6vS93YvYwCVWMM... -
North Idaho Wolfman replied to the thread B7100 Piston Installation.There is almost Zero "Slop" on a Kubota engine. If you have "slop" you have a serious issue. Finding TDC on these engine is super easy...
-
North Idaho Wolfman replied to the thread B7100 Piston Installation.If the timing is off then the valves will be off that will lower the compression. Are you 100% sure you have the valve lash set...
-
-
North Idaho Wolfman replied to the thread 2004 Grand L5030 will not start.Red / White to Black / Yellow
-
North Idaho Wolfman replied to the thread D722 liner needed.I made a post and it got lost in the cyber world. They are not being rude not getting back to you, as used liners are not removed from...
-
North Idaho Wolfman replied to the thread B7100 Piston Installation.OK I misunderstood a few posts back when you said replace injectors. I still think you will have issues due to low compression. Anything...
-
North Idaho Wolfman replied to the thread B7100 Piston Installation.If they are Oregon fuel injection injectors, it's not an injector issue. And you can not get OEM injectors for this motor, they don't...
-
North Idaho Wolfman replied to the thread 1630 loader hydraulic controller replacement.I don't know if this is plug and play, as you might need adapters for the ports...
-
On an 885 CIH tractor the lug that holds the 3pth arm restraining chains snapped. A local welder came and welded it, took about 2 hours...
-
North Idaho Wolfman replied to the thread 2004 Grand L5030 will not start.Give me the color of the wires going to the plug
-
North Idaho Wolfman replied to the thread L2950 broken axle case.Find a local welder that can weld cast. The keep and eye out for a good used part.
-
North Idaho Wolfman replied to the thread Telescopic stabilizer kit opinions?.Get a set from @hodge and you'll be happy with the operation!
-
North Idaho Wolfman replied to the thread First Tractor, First Leak.Russell covered all of it. Check the vent where he showed.
-
North Idaho Wolfman reacted to whitetiger's post in the thread Zd28 horrid grinding sound. with
Like.
Drain the oil from your final drive into a clean container to check for metal shavings or chunks.