JasonW's latest activity

  • J
    JasonW replied to the thread F2680 supernatural phenomenon.
    Really it’s more likely just pressure/vacuum in the dipstick tube. My tractor does the same thing with the hydraulic dip stick. My boat...
  • J
    JasonW replied to the thread F2680 supernatural phenomenon.
    • IMG_3623.jpeg
  • J
    Should be similar to my M6040. Remove what they call the bonnet first. Two screws at the bottom towards the seat and one screw on each...
  • J
    Was you able to download the service manual and look at the wiring diagram? I may have missed something but what part are you calling...
  • J
    JasonW replied to the thread HST drain plug thread size?.
    Adding to the drain pan idea. The storage tote I used was able to slide under the tractor with enough clearance to access the drain...
  • J
    JasonW replied to the thread Found : 7x16 car Hauler.
    And for only $800 difference to go new. New warranty if needed and no rust. And better resale if/when you upgrade. Much easier to sell a...
  • J
    JasonW replied to the thread HST drain plug thread size?.
    I’ll also add I’ve followed your threads about getting this tractor. I would at least get new drain plug gaskets for every drain plug...
  • J
    JasonW replied to the thread HST drain plug thread size?.
    When I changed the transmission fluid in my M (15 gallons) I used a heavy duty storage tote. I use the $12 harbor freight battery pump...
  • J
    Like new Dewalt DCF897 20V 3/4 impact. Tool only $300 OBO Located in Mobile AL. Shipping available
    • IMG_3620.jpeg
    • IMG_3619.jpeg
  • J
    JasonW replied to the thread ZD326 Died; Dump Fuel?.
    Have you downloaded a service manual for your model? Or at least the owners manual? They are useful in many ways even just the diagrams...
    • IMG_3614.jpeg
  • J
    JasonW replied to the thread ZD326 Died; Dump Fuel?.
    I’ll get a picture of the filter I added to my ZD this evening. Do the fuel tanks look clean? Have algae in them? I also replaced the...
  • J
    JasonW replied to the thread Kubota radiators!!!.
    Don’t fix the cause of the issue just pull the radiator every time it plugs up since you was able to do that before.
  • J
    JasonW replied to the thread Kubota radiators!!!.
    I’ve installed aluminum window screen on top of the factory screen. Have to pull it out and clean it more often but the debris doesn’t...
  • J
    Mine doesn’t have a fitting on the jack and it was also difficult to move when I got it. I just sprayed the threads with Kroil and...
  • J
    JasonW replied to the thread How much is my Kubota worth?.
    Sorry for your loss. There was a M7040 Cab and loader with 1,800 hours listed last week in south Alabama for $30k. This is at a dealership.