JasonW's latest activity

  • J
    JasonW replied to the thread Wanted : 7x16 car Hauler.
    And for only $800 difference to go new. New warranty if needed and no rust. And better resale if/when you upgrade. Much easier to sell a...
  • J
    JasonW replied to the thread HST drain plug thread size?.
    I’ll also add I’ve followed your threads about getting this tractor. I would at least get new drain plug gaskets for every drain plug...
  • J
    JasonW replied to the thread HST drain plug thread size?.
    When I changed the transmission fluid in my M (15 gallons) I used a heavy duty storage tote. I use the $12 harbor freight battery pump...
  • J
    Like new Dewalt DCF897 20V 3/4 impact. Tool only $300 OBO Located in Mobile AL. Shipping available
    • IMG_3620.jpeg
    • IMG_3619.jpeg
  • J
    JasonW replied to the thread ZD326 Died; Dump Fuel?.
    Have you downloaded a service manual for your model? Or at least the owners manual? They are useful in many ways even just the diagrams...
    • IMG_3614.jpeg
  • J
    JasonW replied to the thread ZD326 Died; Dump Fuel?.
    I’ll get a picture of the filter I added to my ZD this evening. Do the fuel tanks look clean? Have algae in them? I also replaced the...
  • J
    JasonW replied to the thread Kubota radiators!!!.
    Don’t fix the cause of the issue just pull the radiator every time it plugs up since you was able to do that before.
  • J
    JasonW replied to the thread Kubota radiators!!!.
    I’ve installed aluminum window screen on top of the factory screen. Have to pull it out and clean it more often but the debris doesn’t...
  • J
    Mine doesn’t have a fitting on the jack and it was also difficult to move when I got it. I just sprayed the threads with Kroil and...
  • J
    JasonW replied to the thread How much is my Kubota worth?.
    Sorry for your loss. There was a M7040 Cab and loader with 1,800 hours listed last week in south Alabama for $30k. This is at a dealership.
  • J
    JasonW replied to the thread Transmission Oil Sight Glass.
    No not completely. Just drain just below the sight glass. Or if you’re comfortable have a drain pan ready and remove the old sight glass...
  • J
    JasonW reacted to tkleck57's post in the thread B3300 won't start when hot? with Like Like.
    Correct no crank just a click when I turn key.
  • J
    JasonW replied to the thread B3300 won't start when hot?.
    More details will help like Wolfman suggested. My suggestion assumes that when hot it’s a no crank situation.
  • J
    JasonW replied to the thread B3300 won't start when hot?.
    Add to the above go through and check all your connections to the starter and battery first.
  • J
    JasonW replied to the thread B3300 won't start when hot?.
    I would say it’s the starter or the starter relay. Works when cold but doesn’t when hot/heat soaked. Try to find a place local to you...