Running hydraulics for a backhoe on a BX2370 tractor

[skeeter1981]

Can someone please point me in the right direction in runniing hydraulics to the rear of my BX2370 tractor so I can control the hydrauilics at the backhoe?

Thank you for your assistance!!!

 

[PoTreeBoy]

Can someone please point me in the right direction in runniing hydraulics to the rear of my BX2370 tractor so I can control the hydrauilics at the backhoe?

Thank you for your assistance!!!

Did you add the rear remotes addressed in your earlier thread? If so, maybe post a picture or two.

What model backhoe do you have? If not a Kubota, post a picture of the connections.

Does @North Idaho Wolfman need to merge these threads?

 

[skeeter1981]

The person thats doing it for me didn't understand the earlier photos that were sent to me. I have the BT603 backhoe

 

[skeeter1981]

We haven't done anything with the hydrauiics yet

 

[Sawdust&Shavings]

Did you add the rear remotes addressed in your earlier thread? If so, maybe post a picture or two.

What model backhoe do you have? If not a Kubota, post a picture of the connections.

Does @North Idaho Wolfman need to merge these threads?

BX2370s do not have a backhoe…nor can they unless it’s an aftermarket 3-point backhoe.

 

[skeeter1981]

BX2370s do not have a backhoe…nor can they unless it’s an aftermarket 3-point backhoe.

I realize they don't have one but I have a fabicator doing the work to have the BT603 put on mine
Thank you

Pete

 

[TheOldHokie]

I realize they don't have one but I have a fabicator doing the work to have the BT603 put on mine
Thank you

Pete

The plumbing is easy but as @PoTreeBoy said we need to know what you currently have.

Dan

 

[North Idaho Wolfman]

You asked earlier to add hydraulics to the back of a BX2370, In that thread they pointed to a kit for remotes.
That is much different than adding a Backhoe loop to the tractor.

 

[skeeter1981]

I actuallt wanted to do both. Someone did send the loop info to me. Just wasn't sure how to do it. Thank you

 

[North Idaho Wolfman]

The plumbing is easy but as @PoTreeBoy said we need to know what you currently have.

Dan

He has a BX2370 and wants to plumb it to run a BT603 Backhoe on it.
And also rear remotes.
The BX2370 was never equipped to run a BH, so the plumbing loop that needs to be added would have to be done like a BX23S.
If you need either WSM just ask.

 

[skeeter1981]

I actuallt wanted to do both. Someone did send the loop info to me. Just wasn't sure how to do it. Thank you, Right now I have the standard hydraulics that come with the BX2370 tractor.

 

[North Idaho Wolfman]

I actuallt wanted to do both. Someone did send the loop info to me. Just wasn't sure how to do it. Thank you

Did you buy the kit from colemans to add the rear remotes?

 

[skeeter1981]

Thank You Wolfman

 

[skeeter1981]

Did you buy the kit from colemans to add the rear remotes?

Yes but I was told they wouldn't run the Backhoe unless I tied the levers back!

 

[North Idaho Wolfman]

So you have installed that kit and now have the rear remotes?
Now you just need to add a BH loop to run the BH?

Is this correct?

 

[skeeter1981]

correct!

 

[North Idaho Wolfman]

OK, now we are trucking!

So @TheOldHokie does he need to just make a PB branch off of one of the Remote valve output lines?

This was the kit he got for it:

Part Details | Coleman Equipment

Make a BH loop out of one of these two feed lines?

 

[skeeter1981]

So you have installed that kit and now have the rear remotes?
Now you just need to add a BH loop to run the BH?

sorry for the confusion!!

 

[North Idaho Wolfman]

sorry for the confusion!!

No problem, we got it going down the right road now.
@TheOldHokie should be able to set you up!

 

[PoTreeBoy]

We haven't done anything with the hydrauiics yet

You need 3 connections
* P IN supply to bh
* PB OUT outlet of bh circuit to loader then 3ph
* T TANK (transmission case)
You can look at the BX23s parts diagrams to see how these are provided, and compare it to your tractor to see if they are similar. WorkShop Manuals for both machines are available at KubotaBooks for reference.

I think the BT603 relied on turning the tractor seat around to operate it. Will a BX23 seat assembly work?

Edit: ignore this post. North Idaho Wolfman must have been merging the two threads while I was typing. Since you have installed the rear remotes, you have the first two connections made, and maybe the tank connection. You'll need to tie into that loop. Happy plumbing!