New grapple design with no 3rd function needed.
- Thread starter John D 2
- Start date
A more specific link- https://www.anbomfg.com/mechanicalgrapple
Interesting design. It uses a linkage point that connects to the cross tube in the loader.
Interesting design.
At 388lbs I think it's a little big for a BX or the smaller B series.
Maybe they will design one for the sub compact tractors.
The subcompact market is a lot of equipment.
The other question is can you leave the grapple on the loader and take the loader off the tractor?
Being able to do that would be a big plus.
At 388lbs I think it's a little big for a BX or the smaller B series.
Maybe they will design one for the sub compact tractors.
The subcompact market is a lot of equipment.
The other question is can you leave the grapple on the loader and take the loader off the tractor?
Being able to do that would be a big plus.
Last edited:
While not a heavy duty grapple by any means this one answers most of your questions.
KBX Talon – The Grapple Attachment for Kubota BX (2013+ Quick Attach)
Designed specifically for Kubota BX series tractors (2013 and newer with quick attach), the KBX Talon combines power and ease with an innovative, patent-pending linkage system that lets you take on tough jobs without needing an extra hydraulic channel. Get the versatility of a grapple without the co
www.littlebuckloader.com
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It's like they designed a grapple for a 25 year old tractor.
No one designs loader attachments that pin on.
SSQA has eliminated them.
No one designs loader attachments that pin on.
SSQA has eliminated them.
Nice grapple. Sent them a email to see if any plans for a smaller version for the BX style sub tractors. That KBX looks pretty good too but that bar sticks up to high for working in the woods.
I spy with my little eye….
I like the design, super simple to operate I’d bet too. I dislike the top links attached to that bar ran through the loader frame.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
That make a lot more sense, They need to point that out, using an SSQA of the same color hid it.
Your still need to manually disconnect the link and the pipe.
You should have also spied the third function so no need for that contraption.
Last edited:
I did see the connections after I posted. I agree, it’s still a neat design. I feel the top links and long bar on lower tines would pretzel pretty quickly with real world rake use.
Just watched some you tube videos that was posted on the kbx web site. Not bad for the BX series. May consider one.While not a heavy duty grapple by any means this one answers most of your questions.
KBX Talon – The Grapple Attachment for Kubota BX (2013+ Quick Attach)
Designed specifically for Kubota BX series tractors (2013 and newer with quick attach), the KBX Talon combines power and ease with an innovative, patent-pending linkage system that lets you take on tough jobs without needing an extra hydraulic channel. Get the versatility of a grapple without the co