F2690 snowblower to lawnmower.

[Norm01]

I bought a F2690 this past winter and it came with the blower installed. I am now switching over to the mower and can’t seem to find instructions on going from one to the other. I figured out I needed to remove the quick disconnect plate, mounted the mower but it won’t raise. There are two blocks as you try and raise that hit a cross tube. I suspect these are to limit blower height. Am I to remove these for the mower.

 

[garyp]

Norm01 I don't have a quick disconnect but if you need some pics I can do that for you.

 

[whitetiger]

I bought a F2690 this past winter and it came with the blower installed. I am now switching over to the mower and can’t seem to find instructions on going from one to the other. I figured out I needed to remove the quick disconnect plate, mounted the mower but it won’t raise. There are two blocks as you try and raise that hit a cross tube. I suspect these are to limit blower height. Am I to remove these for the mower.

The stop blocks will need to be removed.

 

[Norm01]

Norm01 I don't have a quick disconnect but if you need some pics I can do that for you.

 

[Norm01]

Thanks however I figured it out. Those blocks are part of the blower quick disconnect kit and needed to be removed. They limit the height the blower can raise.