What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
i use the 4 in 1 a lot when i need to move dirt its a lot easier to get a load of loose material as you can get the front half raised then dozer a pile and close on it.
when we are just cleaning stalls or the indoor arena after the horses i use the standard bucket.
i dont have a grapple havent seen a need or use for one if i need to move brush the 4 in 1 or the pallet forks work well enough. but im not clearing a lot of area.
I've never seen one in person. I do have a grapple but the bucket is my most used loader attachment. I'd really like to try one out.
No word from anyone since pickup.
I'll probably give em till middle of next week or so then start makin calls.
the 4in1 serves as a time and effort saver for me. it also kinda fills the need for a grapple for the few instance where it would be handy. my main use for the 4in1 is dry lot paddock cleaning. it drops the time to clean when combined with the snow pusher dropped my time from 2 hours to about 40minutes.
the standard bucket is clunky and not easy to get all the poop piles and required manual shovel work. meaning was wasting 1.5 hours or so and having to do manual labor leaving less time and desire for other daily tasks.
i clean dry lots once a month with two to clean meaning im saving 3 hours on that day making it a much easier shorter task.
the 4in1 doea work like a grapple as i can pick up things as long as i dont care about damaging it
Nothing. I mowed the lawn yesterday and the tractor is running great with no maintenance needed. Today, is a day OFF! 
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Well today was clean and repair day. Started with my old Craftsman Pressure Washer. 20+yrs and she started first pull. The brass regulator and screws holding it on the pump however had enough. After an evening of parts searching, time for a replacement. Picked up a Troy Built from Sam’s yesterday. We’ll see if it outlives me. Found that one of the side panels on the B1700 got broken while we were on vacation. A few nuts and bolts and some locktite and back in business. Pressure washed both Orange and put them away. Mid 90’s,
high humidity and no breeze. On to canning pickles.
high humidity and no breeze. On to canning pickles.Attachments
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Mowed a couple of the fields that have trees in them.
Also chipped all of an old dead sourwood tree that fell partly in our private road.
Attachments
Last edited:
Dealer came and got her last week.
I filed a claim with KTAC to get me a new hood, grill, and grill guard. She was starting to look pretty rough these days.
Had to finally do something about it
Come on with the pics of that fine machine brother........ you're killin us over here LOL
I got no chance of seeing a m5-111 around here. M4-071 is the biggest i've seen our dealer keep on the lot.
Bi-weekly watering. Rumor has it we're supposed to get .75" this evening into tomorrow morning. Hope they're right for a change.
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Did the 1000 hr service on the B1700. Fresh oil, filter and I did the fuel filter and cleaned out the air filter as well. As a bonus I pulled the mmm and sharpened the blades, lubed it and scraped all the built up grass. Then I fought the PTO shaft for a good 10 minutes to get it back on. FEL makes blade maintenance easy
