Wondering if anybody has info on the Dbh617/2 backhoe. I've just bought one attached to an Iseki 3210 and have now found that it's leaking from the swivel point when turned to the side. It doesn't appear to use rams but has an enclosed swivel. Any and all info would be greatly appreciated as I can't find any info on the internet.
Dbh617/2 backhoe
- Thread starter Sgottabeford
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
What makes you think it's a Kubota BH?
Where did you get the Model #?
I don't think it's Kubota:
1: Kubota never used model numbers like you posted.
2: Kubota has never used a Rotator like you posted.
Where did you get the Model #?
I don't think it's Kubota:
1: Kubota never used model numbers like you posted.
2: Kubota has never used a Rotator like you posted.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
AWWW... Kubota odd amazement again.
Sorry I doubted you.
OZ only implement, never seen that before.
I will do some digging but not holding much hope out for an answer.
It's very hard to get info on Implements from other countries.
If it's anything like Implements in the USA of that same time period, they will have been made by another well know Implement manufacturer of that time.
In the US WOOD's was the manufacturer of Kubota labeled implements in the 80's and 90's.
What BH manufacturers where there in OZ back 10, 20, 30 years ago?
Look at any models from them and compare.
Sorry I doubted you.
OZ only implement, never seen that before.
I will do some digging but not holding much hope out for an answer.
It's very hard to get info on Implements from other countries.
If it's anything like Implements in the USA of that same time period, they will have been made by another well know Implement manufacturer of that time.
In the US WOOD's was the manufacturer of Kubota labeled implements in the 80's and 90's.
What BH manufacturers where there in OZ back 10, 20, 30 years ago?
Look at any models from them and compare.
Last edited:
Even a little orange lurking under the edge of that tag!
Bill
Yeah don't know. I've been looking at youtube vids of hydraulic rotator repairs. So I'll have ti give it agood clean and see if it has it's own serial number or part number. After that it's a wait till new year and contact Aus kubota and see I guess.
It got me curious and I did a little looking. Didn't find anything but noticed there is a Woods Australia and the model numbering with the DBH kind of follows the way Woods still number attachments. Maybe contact them to see if they made it? I did a search on their site but came up empty but could be because it is obsolete.
Bill
Thanks Bill you're awesome. I've contacted them on their website asking if they made any for Kubota Australia so we'll see what transpires after xmas. Thankyou again. Clive.