new instrument panel

[rob doughtie]

Hello, I installed new instrument panel, works great, However! including a new temp sender switch, I get no response on my panel readout. I have a negative read at my temp sensing wire. Also with new fuel shutoff solenoid, a negative read at wire hookup up and no response for shutoff. Any suggestions?

 

[Russell King]

Check fuses

 

[North Idaho Wolfman]

Trying to get info without any related info, like what the instrument panel is in is really asking a lot form us!

Tractor, Lawnmower, Excavator, Skid steer, Combine, Hover Craft????
And a model number L3560, SVV75, KH007, KLM45, X-14

 

[Runs With Scissors]

Pretty sure it's this model.....

 

[Tractor Gal]

If that circle is the model you're referencing, it is shock by what it sees eating those burgers.

Tractor Gal

 

[GreensvilleJay]

re: I have a negative read at my temp sensing wire.

Sounds like you've got the DMM wires in the wrong holes.....( red in -ve, blk in +ve ).

Also ,please post what you're working on ! I don't assume whatever model you have in the sidebar IS the one of interest..... It also allows us to hopefully get a free WSM to look at the wiring diagram !!!

 

[rob doughtie]

re: I have a negative read at my temp sensing wire.

Sounds like you've got the DMM wires in the wrong holes.....( red in -ve, blk in +ve ).

Also ,please post what you're working on ! I don't assume whatever model you have in the sidebar IS the one of interest..... It also allows us to hopefully get a free WSM to look at the wiring diagram !!!

Sorry model was not listed, BX24 2008 model. What is DMM?

 

[GreensvilleJay]

DMM = Digital Multi Meter

A test meter that converts signals into a digital readout, where 'signals' can be AC volts, DC volts, AC amps, DC amps, Resistance, Capacitance, Inductance, Frequency, etc.