Daily Chuckle

sheepfarmer

Well-known member
Lifetime Member

Equipment
L3560, B2650, Gator, Ingersoll mower
Nov 14, 2014
4,449
677
113
MidMichigan
We must have worked in the same place!
Boy does that ring a bell! I stupidly volunteered to be on a building committee for a group I belong to, and our old building, old school house, had a clogged underground drain carrying rainwater from the roof to what turns out to be an unknown destination. One of my fellow building committee guys was determined to keep digging up the pipe until all the clogs could be resolved. Never mind the excavations would kill some big oak trees. Every second sentence was "my son the engineer". Son saying useful things like you need a signed stamped engineering permit to dig a hole. That we MUST get the pipe to carry this water to the city storm drain in the street. That we must have an engineered design to make a rain garden. Etc.Etc. Couldn't convince him that odds of an 60 year old drainpipe being salvageable were slim. Turns out city has no record that original pipe actually goes into the drain, and they don't especially want our storm water. I proposed we bring the pipe to daylight and run water into a grassy area that acts as a natural swale for the whole property, or leave it draining out a clean out onto the grass, which it has been doing for 10 years. I lost the battle to make a long story short. I have 7 underground drains on my farm, and a lot of experience with old stuff, but they went ahead with the engineer's notions. Dug a huge trench, found pipe full of roots, and broken where it went under driveway. Couldn't either jet it or camera it to the end. Blew through $4500. They'd be out there still digging holes but the only smart thing the board did was cap the money to be spent at 5k. We don't have a lot of money so I would rather have spent it on something else, but not my call. So now we have a pair of new cleanouts right next to the driveway where they will be hit by the guys plowing snow. Grrr.
 
  • Haha
  • Wow
  • Like
Reactions: 2 users

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,550
3,298
113
SW Pa
Sounds about right, common sense is not so common any more :)
 
  • Like
Reactions: 1 user

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
504
1,130
93
bc
old man.jpg
 
  • Haha
  • Like
Reactions: 2 users

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
504
1,130
93
bc
nouns.jpg
 
  • Like
Reactions: 1 users

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,144
6,565
113
Vilonia, Arkansas
Boy does that ring a bell! I stupidly volunteered to be on a building committee for a group I belong to, and our old building, old school house, had a clogged underground drain carrying rainwater from the roof to what turns out to be an unknown destination. One of my fellow building committee guys was determined to keep digging up the pipe until all the clogs could be resolved. Never mind the excavations would kill some big oak trees. Every second sentence was "my son the engineer". Son saying useful things like you need a signed stamped engineering permit to dig a hole. That we MUST get the pipe to carry this water to the city storm drain in the street. That we must have an engineered design to make a rain garden. Etc.Etc. Couldn't convince him that odds of an 60 year old drainpipe being salvageable were slim. Turns out city has no record that original pipe actually goes into the drain, and they don't especially want our storm water. I proposed we bring the pipe to daylight and run water into a grassy area that acts as a natural swale for the whole property, or leave it draining out a clean out onto the grass, which it has been doing for 10 years. I lost the battle to make a long story short. I have 7 underground drains on my farm, and a lot of experience with old stuff, but they went ahead with the engineer's notions. Dug a huge trench, found pipe full of roots, and broken where it went under driveway. Couldn't either jet it or camera it to the end. Blew through $4500. They'd be out there still digging holes but the only smart thing the board did was cap the money to be spent at 5k. We don't have a lot of money so I would rather have spent it on something else, but not my call. So now we have a pair of new cleanouts right next to the driveway where they will be hit by the guys plowing snow. Grrr.
That could have been a quick fix for less than $50 🙄🙄🙄
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,144
6,565
113
Vilonia, Arkansas
Yup. A perforated lid for the cleanout would have done it. Just to keep the kids from dropping rocks down it..
I've always said you need to get an engineer out of the way and let someone else come up with the solution 🤣😂🤣😂

I've dealt with a few over the years that just get me shaking my head.

I've perfected not showing what I'm thinking on my face, but every now and then, and engineer will get me to slip 😂🤣😂😂

I had one give me this huge convoluted list of parts they needed. The list was so long and full of odd ball stuff we wouldn't use, so we told them we would sell them the parts.

But... I had an idea as to what he was wanting to do, so I grabbed a couple manifolds we had made for just such an occasion.

I got to the site, and the engineers employees grabbed the two manifolds and said they would wor perfectly for what they were trying to do.

So I rented them the manifolds for the duration of the job, and sold them a few grand worth of fittings at a hefty mark up, for them to sit off to the side of the jobsite 😂🤣😂😂😂😂
 
  • Like
Reactions: 1 users

RDinNHandAZ

Active member

Equipment
Kubota BX1870, FEL, BX5450 Snowblower, back blade, customized snow cab
Jun 26, 2022
89
105
33
Lakes Region NH and Sonoran Desert AZ
My experience has been very different. I’ve worked with engineers that have come up with the most unique but common sense solutions that saved money and proved reliable, servicable and inexpensive. I’d suggest it may be their backgrounds combined with their education. I’ve lived in a rural agrarian area where most of the engineers grew up on poor dairy farms. That combined with a knowledge of structural physics and chemistry seemed to be the magic combination.
Not all engineers have a Master’s degree either as some I know learned in the on-the-job path to their skillset. The only downside to hiring those is they cannot sign off on the structure or device without a CE certificate. I’ve found both types knowledgeable and worth their cost.
 
  • Like
Reactions: 1 user

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
504
1,130
93
bc
tide pods.jpg
 
  • Like
  • Haha
Reactions: 3 users