I have a L3600GST tractor and wanted to buy an dust ejector valve. Kubota wants over $110 for a complete assembly housing which includes the valve. Would anyone know of an alternate one that would work? The id is 30mm (1-1/4") or close to it. Thanks
Dust ejector source
- Thread starter borgunit
- Start date
Air Intake Components | Donaldson Engine & Vehicle
Donaldson offers a complete line of air intake components, including clamps, valves, hoses and tubing. Available in a variety of styles, sizes and materials.
Bet Donaldson has something. There is a PDF in the link with measurements and part numbers.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Do you have a single element air cleaner or dual element?
Single air cleaner:
Cap assembly
Possibly this valve?
Dual air cleaner:
Single air cleaner:
Cap assembly
Possibly this valve?
Dual air cleaner:
Evacuator Valve TA040-93250 For Kubota M5640 MX4700 MX4800 L2501 L2800 L3010 | eBay
Dust Ejector Valve, Air Cleaner Evacuator Valve, Valve Evacuator. For Kubota Tractor. For Kubota. L4400DT,L4400F,L4400H,L45. L4300DT,L4300F,L4310DT/GST/HST,L4310DT-GST-C/HST-C,L4310F,L4330DT/GST/HST(C).
www.ebay.com
It is a single element filterDo you have a single element air cleaner or dual element?
Single air cleaner:
Cap assembly
Possibly this valve?
Dual air cleaner:
Evacuator Valve TA040-93250 For Kubota M5640 MX4700 MX4800 L2501 L2800 L3010 | eBay
Dust Ejector Valve, Air Cleaner Evacuator Valve, Valve Evacuator. For Kubota Tractor. For Kubota. L4400DT,L4400F,L4400H,L45. L4300DT,L4300F,L4310DT/GST/HST,L4310DT-GST-C/HST-C,L4310F,L4330DT/GST/HST(C).www.ebay.com
I did email Messicks and they said Kubota makes you order the whole assembly to obtain that valve.
I will give my local dealer a shot though.
Last edited:
I may just 3D print an adapter to use with my valve that i use on my Kubota zero turn. That way i just have one size to order.
Don't make a mountain out of a mole hill!
You can go to Amazon and order various sizes to fit whatever your need is. You do have computer access since you have demonstrated it's use here.
That actually is not true. I have been searching. There are lots of variations but without dimensions, how can someone find what fits. I have not found one yet that is not too big. If you know of one, i would appreciate a link to it. ThanksDon't make a mountain out of a mole hill!
You can go to Amazon and order various sizes to fit whatever your need is. You do have computer access since you have demonstrated it's use here.
See post #5. Go to bottom link and order. It states it fits your tractor. If you think it is loose just put a small tie strap around the neck.
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
just checked, the one on my BX23S is 1.5", cost is $3.50 CDN..
could wrap some rubber( bicycle tube ? ) on your air cleaner then clamp mine onto it ?
whole lot cheaper than those epay ones !
could wrap some rubber( bicycle tube ? ) on your air cleaner then clamp mine onto it ?
whole lot cheaper than those epay ones !
The zip tie idea is a good one. I have an extra valve from my zero turn that i will try. Thanks