Daily Chuckle

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,134
5,193
113
Chenango County, NY
I readily admit pinching two saws in a corkscrew soft maple after I dropped it. 45 years ago. Very embarrassing, but did have another bar and chain to finish the job.

Three bars in a standing softwood makes me think he was trying to overcome too much lean and it crushed down on the bar(s)?!?

Might need to cut a pocket in the back cut side for a hydraulic jack.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,146
6,576
113
Vilonia, Arkansas
I readily admit pinching two saws in a corkscrew soft maple after I dropped it. 45 years ago. Very embarrassing, but did have another bar and chain to finish the job.

Three bars in a standing softwood makes me think he was trying to overcome too much lean and it crushed down on the bar(s)?!?

Might need to cut a pocket in the back cut side for a hydraulic jack.
We had a large oak the got split from around 2ft off the ground up to around 40. The split went smack dab through the middle and you could see daylight.

My father in law brought over his old dodge. We hooked the winch up to the tree, and as I started cutting.

One half dropped as I cut through it and pinched the bar.

Neighbor brought over his saw and did it again 🙄🙄🙄
 
  • Haha
Reactions: 1 users

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
IMG_4993.jpeg


Edited slightly as I thought it might push the limits…a friend sends me these things occasionally. Up to you to complete the sentence. :ROFLMAO:
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,503
7,561
113
81
Brookhaven, MS
knotholesawmill.com
In the days of the Wild West, there was a young cowboy who aspired to be the greatest gunfighter in the world. He practiced tirelessly but felt he wasn’t yet first-rate and suspected he might be making some mistakes.
One Saturday night, while sitting in the saloon, he noticed an elderly man at the bar who was once renowned as the fastest gun in the West. Eager to improve, the young cowboy took the seat next to him, bought him a drink, and shared his ambitious goal.
“Can you give me some tips?” he asked.
The old man sized him up and said, “Well, first off, you’re wearing your gun too high. Lower the holster down a bit on your leg.”
“Will that make me a better gunfighter?” the young cowboy inquired.
“Yep, sure will,” the old-timer replied.
Following the advice, the young cowboy adjusted his holster, stood up, drew his .44, and shot the bow tie off the piano player.
“That’s amazing!” the cowboy exclaimed. “Any more tips?”
“Yeah,” said the old man, “cut a notch out of your holster where the hammer hits it. It’ll give you a smoother draw.”
“Will that make me a better gunfighter?” the young man asked.
“Yep, it will,” said the old-timer.
The young cowboy took out his knife, made the notch, stood up, and drew his gun in a blur, shooting a cufflink off the piano player.
“Fantastic!” said the cowboy. “I’m really learning something here—got any more advice?”
The old man pointed to a can in the corner of the saloon. “See that axle grease? Coat your gun with it.”
The young man went over, smeared some grease on the barrel, and returned.
“No,” said the old-timer, “I mean cover the whole gun, handle and all.”
“Will that make me a better gunfighter?” asked the young cowboy.
“Nope,” replied the old-timer, “but when Wyatt Earp finishes playing the piano and comes after you, it won’t hurt as much.”
 
  • Haha
Reactions: 2 users