P-208B code…..Please Help!!

[GlidePilot893]

I was preparing to start cutting and baking hay tomorrow to try to get some done before a chance of rain on Thursday. My 2016 M5-111 is beeping and has Engine P-208B Code and is in count down mode to 80% Power Reduction….the code is a generic DEF code regarding Reductant Pump Control/Range. Is this common and what could the issue be?

Any and ALL help is greatly appreciated….

 

[North Idaho Wolfman]

You know it really helps if you use the Kubota WSM and Kubota codes to figure out what's wrong.
It's a heck of a lot more accurate than an internet answer to a code, which by the way is wrong because kubota does not use standard OBII codes.

Look on page 10-93 for the exact answer to your code, and what to look at to fix it.

 

[whitetiger]

Here is the DTC info from the M5-111 WSM. Looks like it is going to have to be diagnosed using Diagmaster though.

 

[GlidePilot893]

You know it really helps if you use the Kubota WSM and Kubota codes to figure out what's wrong.
It's a heck of a lot more accurate than an internet answer to a code, which by the way is wrong because kubota does not use standard OBII codes.

Look on page 10-93 for the exact answer to your code, and what to look at to fix it.

Thank You for posting as I was not aware of the status of Kubota not using OBDII Codes.Your comment was helpful!!

 

[GlidePilot893]

Here is the DTC info from the M5-111 WSM. Looks like it is going to have to be diagnosed using Diagmaster though.

Thank You, I will use this Intel in my approach to get resolution!!