Two Problems

[Torrin]

1. I am an owner of a BX2680 with a factory cab. The cab has an id plate that says Curtis Cab Made exclusive for Kubota Inc. My problem is that the heater blows the fuse when the fan is on and then turned off. Does anyone know where I can get a manual or parts book for the cab?

2. I also own and older RTV 1100c (not an X1100). There is no voltage to the tail lights. I have checked all of the fuses that are in the block, but there are two open slots. Does anyone have a fuse block placement diagram?

 

[GreensvilleJay]

re: 1 call/write/email Curtis Cab. THEY built it, they will know.

re: 2 follow the wires ! maybe some 'bullet connector ' has come apart, perhaps no ground at lights ?

 

[Lug66]

2. See if this helps.

 

[Torrin]

2. See if this helps.

That is great, The two empty slots match, so I am sure that wiil help

 

[DustyRusty]

1. I am an owner of a BX2680 with a factory cab. The cab has an id plate that says Curtis Cab Made exclusive for Kubota Inc. My problem is that the heater blows the fuse when the fan is on and then turned off. Does anyone know where I can get a manual or parts book for the cab?

2. I also own and older RTV 1100c (not an X1100). There is no voltage to the tail lights. I have checked all of the fuses that are in the block, but there are two open slots. Does anyone have a fuse block placement diagram?

I have the Curtis Cab manuals in PDF, but I think that the files are too large for posting.

 

[Torrin]

I called Curtis, and they were very helpful, they gave me the Kubota part number, and I found my Part numbers and info on the cab on the Kubota illustrated parts list website. Thank you all for your replies.

 

[BX'r]

What is the amperage draw for the heater and fan and what fuse is connected to it?