L2800 dies when engaging pto

racer86y

Member

Equipment
2010 Kubota L2800
Sep 7, 2022
33
5
8
Kingston,Ok.
It does not seam to do it all the time but once it starts it will die every time i try to engage pto.I can drive forever without pto.Could it be seat sensor?
 

old and tired

Well-known member

Equipment
L2800 HST; 2005; R4
yes, most likely... It might be awkward, but try engaging the PTO with the seat tilted forward... or zip tie the sensor down. I ran the wire to the sensor, over the "arm" that detects if someone is seated in the seat (basically holding the sensor's arm in the down position)...
 
  • Like
Reactions: 1 user

racer86y

Member

Equipment
2010 Kubota L2800
Sep 7, 2022
33
5
8
Kingston,Ok.
yes, most likely... It might be awkward, but try engaging the PTO with the seat tilted forward... or zip tie the sensor down. I ran the wire to the sensor, over the "arm" that detects if someone is seated in the seat (basically holding the sensor's arm in the down position)...
yes, most likely... It might be awkward, but try engaging the PTO with the seat tilted forward... or zip tie the sensor down. I ran the wire to the sensor, over the "arm" that detects if someone is seated in the seat (basically holding the sensor's arm in the down position)...