L3901 3 point lift height

[OldcrowP51]

The 3 point on my tractor doesn't seem to go as high as it used to.
It has been well documented by others how a quick attach hitch will hit the rear marker lights.
Currently mine won't go that far.
Is there some type of limit switch effecting lift height?

 

[jyoutz]

The 3 point on my tractor doesn't seem to go as high as it used to.
It has been well documented by others how a quick attach hitch will hit the rear marker lights.
Currently mine won't go that far.
Is there some type of limit switch effecting lift height?

Did you change the hole that your top link is attached to?

 

[whitetiger]

The 3 point on my tractor doesn't seem to go as high as it used to.
It has been well documented by others how a quick attach hitch will hit the rear marker lights.
Currently mine won't go that far.
Is there some type of limit switch effecting lift height?

Raise the 3-point hitch fully, then lift the 3-point arms by hand to see how much more they will raise before hitting the stop.
If they can be lifted more than 3/4" measured at the end of the arm on the rock shaft, they can be adjusted on the LH side.

 

[North Idaho Wolfman]

Also a maladjusted feedback linkage can also cause the three point to not reach its full height.