johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
While running my B3200 last week to clean debris from the ditches, I noticed the HST was whining a bit louder than normal in high range. Got back to the barn and the fluid on the dip stick was just touching the tip. Easy fix. I went and purchased fluid today and before topping up, I checked the level again. It was just over the high mark. She is parked on a flat surface. Now I’m scratching my head. Fluid and filters were changed at 200 hrs and I now have 234 on her. I may suck some out to get it back to the full level but it has me wondering what is going on. No whine in low or mid range and playing with the rpms and pedal depression will change the whine in high range. Thoughts?