My loader valve has started leaking, and I read all the rest of the sad tales of woe where people have swapped the Kubota system for individual quick connects, etc. I decided to call my selling dealer to see what the present status of the problem resolution was. I was first informed that my tractor was out of warranty, and then this morning I got a call from the fellow who deals with warranty issues and was told that Kubota was extending the warranty on the loader valve for 5 years from the delivery date. They are sending me new parts to install since I don't want to trailer the tractor back to them for the service. The new part has been redesigned to resolve these leaking problems. I will update this post with pictures of the new part(s) when they arrive.
BX23S Loader Valve Leaking
- Thread starter DustyRusty
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
I believe that the dealer is sending the quick connect coupler manifold. He only told me that it was redesigned and has a ring on it, but not being familiar with it I will have to wait to see exactly what it is.
In my experience on my 2017
I found that the manifold itself did not sit 100% flush.....
and the locking mechanism did not put pull pressure on the 2 manifold mating pieces... evenly.
To sum up, It's a sh*tty design.
I went with individual pioneer connectors and never looked back.... no leaks. no issues.
Best of luck with the "new improved" manifold.
but personally, I'm very skeptical. crap is crap.
Look forward to the update...
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
That's not luck... it's wisdom.No need to wish me luck - I dont own a BX
Dan
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
I have had my loader off many times. My hours are about 170. I took the loader off yesterday and rehooked the lines after cleaning with brake cleaner. It hasn't leaked since. I told this to the dealer representative, and he responded that if it leaked once it would leak again, and that the part needed to be replaced.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
When did Kubota start using the "new" manifolds? Would my late '21 BX2380 have the new one?
GibbyESS9
Active member
Equipment
2020 Bx23s,BX2672 plow, Titan Forks, Land Pride 48” BB, FEL, Bestco Flail mower
So having a BX23S also, I have had my loader off once or twice. No leaks yet but only have about 72 hours on the tractor. Its at my vacation property.
First tractor also, do they do anything like service bulletins? It could be a potential problem for me, but what if its past the five years? Hmmmmm. Its a 2020.
First tractor also, do they do anything like service bulletins? It could be a potential problem for me, but what if its past the five years? Hmmmmm. Its a 2020.
The best thing to do is to call your selling dealer and ask about having it done. Mine never leaked until this past month. Took the coupling off and reinstalled it, and the problem was gone. My dealer said to do the upgrade because the leak will come back. I will post to this thread when I receive the parts.
A friend of mine also has a BX23S and bought his before I got mine. Since I have bought parts from his selling dealer and am waiting for a part I spoke to the Parts Manager this morning who looked up the service bulletin. Said it had nothing about time constraints, but there were 3 different parts to the modification. He also said to book the repair through the service department so they could have the necessary parts ready for when the tractor comes in for the service. Unlike my dealer, who is sending me the part or parts for me to install on my own. My dealer only wanted the Serial number of my tractor, however, the other dealer said that they needed the loader serial number. I think that there is a lot of service time involved with the modification, and his dealer doesn't want to lose that income. My dealer on the other hand has an extremely busy service department and is glad that I don't want to bring it in for the service.
My new part arrived today by UPS. It is part #7J627-85010. I looked up the cost on Messicks and the part price is $216.25. It is just the lower part of the loader's hydraulic connection.
Hmmm... from memory it doesn't look any different than the one I already have, circa 2017.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Check your serial number and compare the coupler tips per the picture.
I always wanted the quick manifold for my B2601, I held off buying waiting for the new model. They never implemented that manifold in NZ, apparently NZers wouldn't be wiling to part with the extra $200 or whatever it put on their unit price. So I didn't get it. Even with the issues people talk about, I wish I had it. The pioneer couplers are just a bit fiddly, and they're sort of in behind the loader (although I guess that stops them getting damaged). Every time I take the loader on and off I have to squish up the right hand side of it, and my shed isn't big.
If they have that manifold working reliably then it is well worth having in my mind.
If they have that manifold working reliably then it is well worth having in my mind.