Kubota L1802 (equivalent L235): where is the steering gear box oil inlet port?
- Thread starter Seiga
- Start date
Russell King
Well-known member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
I don’t know about that model but I will look at my L185 and see if I can find it and get back to you with a picture tomorrow (in USA)
Last edited:
Russell King
Well-known member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
The fill port is on the left side (sitting in tractor seat) of the tractor. It is on top of the steering box which is bolted on top of the clutch housing.
It will be difficult to see but bend your head down into the shifter area and look forward under the dash cowling. On my tractor it is beneath the fuel tank and the steering column comes down through the fuel tank.
The red object (pen) is pointing at the square head pipe plug that is the fill port.
In this picture the red object is touching the plug
You can see that area is very dirty so you may need to remove debris and oily residue to see it
It will be difficult to see but bend your head down into the shifter area and look forward under the dash cowling. On my tractor it is beneath the fuel tank and the steering column comes down through the fuel tank.
The red object (pen) is pointing at the square head pipe plug that is the fill port.
In this picture the red object is touching the plug
You can see that area is very dirty so you may need to remove debris and oily residue to see it
ken erickson
Well-known member
Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
There is a restoration video of a L1802 on YouTube. I pulled this screen shot Of the steering box. I have no idea if they made changes in this series of tractors, with yours being a different box. I also do not know if they offered a power steering version. Is yours manual steering?
