I figured it would void the warranty, but dang it, that little plastic box they put on that tractor is practically useless, and it won’t take long for the plastic hinge to break.
I might have missed it, but do you have a part number or link or something to help source that?
I did basically the same thing on my MX. I used an old craftsman toolbox that I’ve had for 40 years. It’s basically the same box, but without the Deere sticker. Mine is now painted Kubota Grey. Next to it on the crossbar, I mounted a small metal ammo can that serves as a glovebox for small items and extra water bottles.
The toolbox part number is RE275591 and the bracket is T23033. I got both items at the local JD dealer for about $100.
I was also trying to figure out a way to use an ammo can or one of those Apache (Pelican knockoff) boxes from HF but kept going back to the JD box because of the size and the ability to pull a pin and remove the box from the mount. The placement works out well because I can reach the box from the seat or from the rear of the tractor to get a pin.
I considered using flattened expanded steel on the bottom but went with a solid plate with notches to let water drain out.
AND you gave them your money willingly? I figured you just had it kicking around, mabey got it free off a friend...
Thanks for the ideas. I searched but didn’t find much. I like what you have done to that tool carrier.
That is an awesome set up…very functional. I think you could sell / market that!…I have to ask, what’s the tire used for?
120’ of 3/8” cable. Makes it easy to store and carry. Old atv tire with one bead cut out. Few holes in the tread for drainage.
I think the plate is a better idea overall as well.
