Vinyl seat repair

[Semo]

I bought my kubota machine a few months ago. It's a 2020 model and the seat is in near new condition except for a 1/8" small hole where a cigarette or ember touched it. Am hoping to get some suggestions on what to use to keep it from getting bigger. Thanks all.

 

[Donystoy]

I have seen folks at car shows who advertise vinyl repair. Never used them but a Google search might work.

 

[jyoutz]

Deleted

 

[jyoutz]

https://www.amazon.com/Coconix-Vinyl-Leather-Repair-Kit/dp/B07JC7SFNS/ref=mp_s_a_1_8?crid=2YMKYEJBUHVH4&keywords=vinyl+repair+kit&qid=1688683751&sprefix=vinyl+re%2Caps%2C240&sr=8-8

 

[kubotafreak]

liquid plasti dip works well. Just keep applying/drying until it builds to the thickness you want.

 

[BXHoosier]

I used this to repair a small cut in my seat. It held up great for a couple years. I recently changed the seat out for a more comfortable one.

 

[Semo]

All good suggestions. Thanks to all.

 

[Smokeydog]

Durafit seat cover is a pleasant upgrade over the vinyl seat. About $30, fits tight and much more comfortable in hot weather.

 

[Semo]

View attachment 106656
Durafit seat cover is a pleasant upgrade over the vinyl seat. About $30, fits tight and much more comfortable in hot weather.

I like that. Got back on machine a couple of days ago after the seat got full sun for a few minutes and got the hot seat. Started me wondering about some type of cover right then.

 

[mikester]

 

[Countrylife]

liquid plasti dip works well. Just keep applying/drying until it builds to the thickness you want.

I had a tear in my seat and used plasti-dip then put a piece of canvas on that (while still wet) for reinforcing and then more plasti-dip. It has worked well.