Waaay unusual topic

WHW

New member

Equipment
Kubota 4701
I live on a barrier island (Grand Isle) on the Louisiana coast. Hoping to find some info about protecting a side by side from salt damage. Maybe some of you that fight road salt have a better idea than I came up with..

My plan is to use a water sprinkler with a connection like what I use to flush out the outboard motor and wash down the skiff. I have had good results over the years with Salt Away as the flushing agent, so with the sprinkler slid under the SxS, I can let it run and move it around to try to get the nooks and crannies flushed.

Any thoughts that might point a better way for me?

Thanks,

WW
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,131
6,535
113
Vilonia, Arkansas
I live on a barrier island (Grand Isle) on the Louisiana coast. Hoping to find some info about protecting a side by side from salt damage. Maybe some of you that fight road salt have a better idea than I came up with..

My plan is to use a water sprinkler with a connection like what I use to flush out the outboard motor and wash down the skiff. I have had good results over the years with Salt Away as the flushing agent, so with the sprinkler slid under the SxS, I can let it run and move it around to try to get the nooks and crannies flushed.

Any thoughts that might point a better way for me?

Thanks,

WW
They have similar set ups at rock quarries around here. Basically a large set of sprinklers shooting water up through a large cattle guard. As well as side sprinklers for the tires and sideboards of the trucks.

Driving over a sprinkler and hosing down the sides seems like a pretty easy solution 👍👍👍👍

To leave the quarry you must run over the cattle guard.

Running over a sprinkler or two seems like an easy solution as well as coating the belly with some fluid film.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,785
5,493
113
40 miles south of Kansas City

cthomas

Well-known member
Lifetime Member

Equipment
LX2610 HSDC
Jan 1, 2017
865
579
93
La Farge Wi
Had a customer with a old rust free K-car and he swears that turtle wax and then coat with aqua net hair spray on the undercarriage stops rust. I do not know but his car was rust free. Fluid film is another good choice, just perform an undercarriage wash pretty often.
 

RichardAaronlx2610

Well-known member

Equipment
Lx2610 Cab, Fel, Backhoe, Grapple, Box Grader, Forks
Aug 3, 2021
441
490
63
New Jersey

watch This as well. If you’re not following him yet, give him a follow. He’s super helpful with big purchases
 

Smokeydog

Well-known member

Equipment
M59, B26 grapples, backhoes, tillers, graders, diesel atv
Jun 2, 2020
662
614
93
knoxville, Tennessee
CorrosionX has helped my truck and airstream trailer sit yearly fall vacations on the beach in Florida Emerald coast for 26 years.
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
Fluid film
IMHO LPS-3 (it has a mil spec.) is a better salt spray protectant than Fluid Film.

Where I worked, the cargo compartments of our airline aircraft were all treated with LPS-3 prior to being put in service, ostensibly to protect aluminum from animal urine corrosion.

I live by the salt water.
I have been using LPS-3 for 50+ years.
 
Last edited:

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,201
1,887
113
Mid, South, USA
u can keep salt OFF of stuff but can you keep it OUT of other stuff?

Bearings, axles, suspension joints, shocks, and a ton of other areas.

I actually made my own undercarriage washer, similar to the one in the pic above but it sprays upwards. Slick little tool that I use often on the SxS, and truck, and cars. But I don't live in the salt belt, things do rust here but it takes a long time.