Wildfire
Active member
Equipment
Kubota L5740 HSTC3 and a Kubota ZG222Z, 2013 BX25D,Custom Toyota fork lift.
One thing that always bugged me owning the two Kubota’s I’ve had was the 4X4 leaver. I had to try and remember if 4X4 was down or up. sometimes I’d leave it in and sometimes I’d leave it out.
Why didn’t Kubota put an indicator showing with the system was in 4X4? well I decided to do it myself. I bid and won an indicator off an old dodge truck on eBay. I picked up a switch and mounted it to the 4X4 leaver and did the wiring. The switch can be wired normally open or closed so I went open for this application.
I didn’t like the old indicator housing so I took a LED marker light and adapted the indicator to it. Used two way tape on the back and stuck it to the windshield. Now I’m happy Here’s a few photo’s.
Here I'm getting ready to paint the outer areas black
Not in 4X4
In 4X4
Why didn’t Kubota put an indicator showing with the system was in 4X4? well I decided to do it myself. I bid and won an indicator off an old dodge truck on eBay. I picked up a switch and mounted it to the 4X4 leaver and did the wiring. The switch can be wired normally open or closed so I went open for this application.
I didn’t like the old indicator housing so I took a LED marker light and adapted the indicator to it. Used two way tape on the back and stuck it to the windshield. Now I’m happy Here’s a few photo’s.
Here I'm getting ready to paint the outer areas black
Not in 4X4
In 4X4