Kubota b6100, no start, timing to early, no shims to remove.

[Jaredaustralia]

Hi all, first post here. Been using this site for its great articles.
fix mainly small tractors.
working on kubota b6100, compression tested at 330psi
Injection timing was off, done spill test but after removing all shims I’m still about 1inch to early from the injection mark on the flywheel. Any help much appreciated.

 

[kubotafreak]

Measure the fuel cam lobes.

 

[PoTreeBoy]

Hi all, first post here. Been using this site for its great articles.
fix mainly small tractors.
working on kubota b6100, compression tested at 330psi
Injection timing was off, done spill test but after removing all shims I’m still about 1inch to early from the injection mark on the flywheel. Any help much appreciated.

If timing is advanced, don't you need to add shims?

 

[North Idaho Wolfman]

If he hasn't fixed this in a year, he's got bigger timing issues.
1/15/2022

 

[North Idaho Wolfman]

PoTreeBoy,
Why you mad at me, It was a one hit wonder post, I was just pointing it out.

 

[PoTreeBoy]

PoTreeBoy,
Why you mad at me, It was a one hit wonder post, I was just pointing it out.

That was red embarrassed face, not angry

 

[RCW]

That was red embarrassed face, not angry

I held my cursor over the red face in your reaction, and it said "angry"....

I wouldn't know the difference if I hadn't done that......

 

[North Idaho Wolfman]

I held my cursor over the red face in your reaction, and it said "angry"....

I wouldn't know the difference if I hadn't done that......

HAHAHA all good!

 

[xrocketengineer]

HAHAHA all good!

I guess that most of us are too old and were not raised using smilies or whatever the hell they are called. So, confusion is the norm with the exception of the obvious ones, like chocolate ice cream