I recently purchased a BL4690 backhoe for my L3010. The backhoe was attached to a B series tractor which requires different linkage than the L series . Unfortunately Kubota discontinued the mast bar part # 70050-93764 in the parts list and callout part #24 in the image. I am hoping someone has one of these and can provide the overall length and hole spacing so we can fabricate them.
BL4690 backhoe
- Thread starter kubotashrek
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
please take a look at the parts image that was attached callout 24, 25 they list 2 parts one with 5 holes for a B series and one with 4 holes for an L. Please see the parts listing
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
My mistake, The online print shows it coming with both one on each side.
If your setting up as a three point BH do you have the top link reinforcing bracket?
If your setting up as a three point BH do you have the top link reinforcing bracket?
I have the correct Mast Ear for the L series. Are you asking about that or the bracket on the back of the tractor that it hooks up to?
Attachments
I think i found what you are talking about take a look at the image
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
still need help with the original question about the size of the mast bars if anyone can help
torch
Well-known member
Equipment
B7100HSD, B2789, B2550, B4672, 48" cultivator, homemade FEL and Cab
I think you might need both the "Mast Ear" 70050-93766 and the "Mast Bar" 70050-93764.
The parts for the reinforced top link bracket for the Grand L models include:
70050-94877 BRACKET HD
70050-94384 BRACE RH
70050-94385 BRACE LH
70050-94887 SPACER FLAT (two required).
Sorry, I have a B, so I can't provide the measurements.
The parts for the reinforced top link bracket for the Grand L models include:
70050-94877 BRACKET HD
70050-94384 BRACE RH
70050-94385 BRACE LH
70050-94887 SPACER FLAT (two required).
Sorry, I have a B, so I can't provide the measurements.
I have a BL4690 backhoe. But it is set up for my B2910 so I guess I can’t help. Sorry…