I checked the thermometer last night at 11PM and it was 36 deg. This morning at 6:30 it was 3 deg. with wind blowing and snow falling, wind chill -24. Coming Monday it's suppose to be upper 40's.
Are you enjoying the weather change?
- Thread starter D2Cat
- Start date
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
We expect a 30 degree rise and then dip in temps this weekend.
My mom used to say that these crazy temperature swings were mother nature's way of killing off the old people.
My mom used to say that these crazy temperature swings were mother nature's way of killing off the old people.
mcmxi
Well-known member
Lifetime Member
Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Not when it's this cold. 
It dropped down to -30F and got up to a balmy -10F by around 1pm but didn't stay there for long! The scenery is beautiful but potentially lethal. I have to watch my Heeler closely in this weather. She runs off into the snow and her feet get so cold that I have to be prepared to grab her and carry her back to the house.
It dropped down to -30F and got up to a balmy -10F by around 1pm but didn't stay there for long! The scenery is beautiful but potentially lethal. I have to watch my Heeler closely in this weather. She runs off into the snow and her feet get so cold that I have to be prepared to grab her and carry her back to the house.GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
It's not too bad, but I'd like some of the recent global warming to happen during the hottest days of summer. 
Please be politically correct, it is no longer global warming it is now called climate change. Climate change is where it gets colder where it is normally cold, and warmer where it normally is warm, or something like that or vice versa.
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
No matter what side you on are the Polar Vortex is not well understood .
My kids in Alabama are not happy about it.
My kids in Alabama are not happy about it.
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
45° when I left work. Got just north of little Rock, thermometer was showing 43°. Checked mirrors, looked at thermometer again and it dropped to 32°
There was definitely a line I crossed 
Changed from rain to snow about 5 miles up the road. Mirrors iced up shortly afterwards and had to kick on the heated mirrors. It was snowing pretty decent when I walked gypsy when I got home about 2:30. Took her out for her pre-dinner walk around 4:45. Sidewalks driveway and streets were iced up with about 1" of snow on the lawn.
Gonna have to dig out my ice cleats before I walk gypsy later before bed.
Winds blowing like the dickens. Had to put my shoulder into the door to close it after taking out the trash.
Changed my mind on what to make for dinner. Instead of meatloaf, I opted for a pot of chili.
Poohbear
Active member
Equipment
L3301 HST, LA525, LP shredder, BB1566 box blade, QH10, Worksaver pallet fork
It's 14 deg at 5:58 pm here in East Tx and supposed to get down to 9. It even snowed a bit. I hate it.
On the bright side I'm sitting here eating my Wife's chocolate chip cookies & followed by Chex mix.
On the bright side I'm sitting here eating my Wife's chocolate chip cookies & followed by Chex mix.
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
I know I’ll get no sympathy here from you folks who live up “Nawth”…. but 17-degrees here in the Hill Country of Texas is a rare event. Brrr…. (got a warm fire in the fireplace tho’ and a glass of Bourbon to soothe me over it.)
It was -26°F (actual temp) the other morning that I needed to blow snow. I waited a day and it had warmed up to -16°F. A noticeable difference!! Put the winterfront covers on the B2650 and had the accumulated snowfall cleared in a few hours with no issues. And toasty warm in the cab, too. Nice not to have to wear longjohns and jacket while moving snow in sub zero temps.
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
It was -30 last night, but it will be a balmy -14 tonight. The high Sunday is supposed to be high 40s though. A little bit strange. Hopefully, the chickens will survive tonight, too.
Yep, right here with ya (Deep East Texas) supposed to be 9-10° F by morning. Wife brought home some cookie mix and fixings for a big batch of Chili, but it will tomorrow before I get any of that.
NO...not happy with the weather change.