Work Shop Manuals (WSM)

[Husko]

Thank you thankyou

 

[MastiffDude]

I have used servicemanualvault.com on several occasions. They have a quick download of a lot of KUBOTA tractors, excavators etc. On one occasion, I got the wrong machine. every other time, I got the right machine and a really good clear manual. The cost is $9.95 per manual. I just checked and the do have L3200 showing.

I just bought the "Service Manual" for the T1400H. Waste of money - I have requested a refund. The PDFs contain high-level information on a variety of manufacturers, and nothing specific about the T1400H. The Engine section had info on any number of manufacturers, but none on any Kubota engine.

 

[Dave_eng]

I just bought the "Service Manual" for the T1400H. Waste of money - I have requested a refund. The PDFs contain high-level information on a variety of manufacturers, and nothing specific about the T1400H. The Engine section had info on any number of manufacturers, but none on any Kubota engine.

Sorry my suggestion did not work out for you regarding the T1400

Dave

 

[farmerbyaccident]

Hi, I am in need of a WSM for my L1361 HST, any ideas on where to get it?

 

[nbking]

I bought wsm's off of Ebay about 5 years ago. They are on CD's, I think they were like $9.99 each, for my RTV-X900 and the L2501. I like how I can just print out the pages I need, and can highlight, write on them, spill stuff lol. From some guy in Canada

 

[racerboy]

I went to the Coleman’s site to look for a WSM for my 2021 B2601 and the most current one looks like it’s from 2017.

https://www.colemanequip.com/parts/...---TRACTOR--B2301-B2601--NOV--17/9Y111-11562/

would that be correct even for a newer machine?

thanks

 

[North Idaho Wolfman]

I went to the Coleman’s site to look for a WSM for my 2021 B2601 and the most current one looks like it’s from 2017.

https://www.colemanequip.com/parts/...---TRACTOR--B2301-B2601--NOV--17/9Y111-11562/

would that be correct even for a newer machine?

thanks

Nope, wrong manual, 9Y911-11565

Kubota #9Y111-11565 WSM TRACTORS B2301,B2601 MAR'19

WSM TRACTORS B2301,B2601 MAR'19

www.messicks.com

 

[rrthor]

Hi, I am a new owner of a L2501. I downloaded a shop manual from kubotbooks.com. The manual front page says "Workshop Manual Tractor L2501. On the bottom of the second page it has date of September 2014. Would this be the correct manual for my new L2501H. Thanks for any help and this great forum

Rick
L2501
RCR 1860
BB 1260

 

[TJ Industries]

Anyone have a suggestion for getting the KX161-3S workshop manual? It's P/N 97899-61260.

I really prefer PDFs so I can use them on my computer and print out disposable pages, but the only sources I've seen that offer it appear to be a printed copy.

Thanks

 

[PoTreeBoy]

Anyone have a suggestion for getting the KX161-3S workshop manual? It's P/N 97899-61260.

I really prefer PDFs so I can use them on my computer and print out disposable pages, but the only sources I've seen that offer it appear to be a printed copy.

Thanks

I'm not sure if dealers have access to PDF's on construction equipment like they do on tractors. You could ask.

I like PDF's also - carry my manuals on my 'phone'.

 

[tgarber22]

Anyone know where to get a cheep WSM for mx5200.
Electrical issues last night and I have no idea where to start.

 

[lafx]

Same as everyone above here. Searching for a cheap/free WSM for my old L2900. Many are offered online, but after reading many disapointed posts on their purchase, I prefer being referred to something good than bad. Thanks for any help.

 

[Dave_eng]

Same as everyone above here. Searching for a cheap/free WSM for my old L2900. Many are offered online, but after reading many disapointed posts on their purchase, I prefer being referred to something good than bad. Thanks for any help.

As a starting point tell me which is the most important section of the wsm to you.
I will then send you a couple of pages of that section and you can decide if the quality of the material I have is good enough.
Even Kubota's main library does not have great manuals for older models.
Dave

 

[lafx]

As a starting point tell me which is the most important section of the wsm to you.
I will then send you a couple of pages of that section and you can decide if the quality of the material I have is good enough.
Even Kubota's main library does not have great manuals for older models.
Dave

I am replacing the fuel injectors and was searching for the torque specs. Rear axle and brake hub. Also replacing the left brake hub as I broke one of the two ears off that anchors the lifting arm. I'll manage on the rest myself. Plenty of good posts here and youtube how to. Thank"s Dave

 

[DustyRusty]

Same as everyone above here. Searching for a cheap/free WSM for my old L2900. Many are offered online, but after reading many disapointed posts on their purchase, I prefer being referred to something good than bad. Thanks for any help.

Cheap and free are not synonyms for quality.

 

[Daferris]

Just a quick tip on getting WSM's from your dealer. ( At least mine) they offer the manual in print and also as a PDF on a thumb drive. The paper copy is $100+ and takes a month or more to get. The PDF on a thumb drive was $15 and they had it ready in about 10 minutes...

 

[DustyRusty]

When I purchased my Vermeer chipper, I asked for a Work Shop Manual on a memory stick and was told that wasn't allowed by the Parts Department Manager. The Service Department Manager relayed my request to the parts department. When he heard the reply, he went into his office and printed the manual on a color copier, and an hour later, I walked out with it. Almost a ream of paper.

 

[lafx]

Just a quick tip on getting WSM's from your dealer. ( At least mine) they offer the manual in print and also as a PDF on a thumb drive. The paper copy is $100+ and takes a month or more to get. The PDF on a thumb drive was $15 and they had it ready in about 10 minutes...

I'm always awed at the prices posted. But they usually are U.S currency prices. Transferred into Canadian equals to a whiplash. I'll follow your advice at my next Kubota dealership visit

 

[lafx]

Just a quick tip on getting WSM's from your dealer. ( At least mine) they offer the manual in print and also as a PDF on a thumb drive. The paper copy is $100+ and takes a month or more to get. The PDF on a thumb drive was $15 and they had it ready in about 10 minutes...

Followed your tip for the dealership WSM. Went Monday to my local dealership (Montreal) for parts. Also inquired about their WSM. Was quoted something like $800 for the paperback and $240 for the PDF version. I am still without a WSM. I'm now very curious to know what Kubota USA is asking as opposed to Kubota Canada.

 

[fried1765]

Followed your tip for the dealership WSM. Went Monday to my local dealership (Montreal) for parts. Also inquired about their WSM. Was quoted something like $800 for the paperback and $240 for the PDF version. I am still without a WSM. I'm now very curious to know what Kubota USA is asking as opposed to Kubota Canada.

There is a 492 page L2900 WSM listed on EBay (USA) for $78 ($106 CAD?)
It is E-Bay item # 364067892696
Described as "brand new, still in shrink wrap"
Located in California.
It is Kubota part # 9789711610

Shipping is free in USA.
The seller does offer shipping to Canada, but shipping pricing is not posted.