3901 HST transmission oil change

Smokeless

Member

Equipment
3901/Loader/Rear Blade/Box Blade/LP Mower/Pallet forks IH M,,Cub & sickle mower
Feb 5, 2018
237
9
18
Southern Illinois
My operator manual indicates transmission filter change at 50hrs, then every 200.

Popped in to the dealer and told them i changed engine oil/filter and transmission filter. Was immediately asked if i changed transmission oil. I said no, manual only instructed to change filter at 50hrs.

I am getting mixed signals. Is there a mandate by Kubota to change hst transmission oil at a certain time?

Thanks
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
If I change the Filters, I change the Fluids. My dealer recommends to change Transmission Oil at the 50 hour mark.
 

Tropical Jack

Active member

Equipment
Kubota L3301 w/ FEL & BH, tilt and trim, chipper, box blade, grading blade
Kubota recommends the filter only at 50 hours. You will find some people here that follow that; and others who cannot change a filter without changing the fluid. There is no right answer - but there are a lot of opinions!

Jack
 
  • Like
Reactions: 1 user

rjcorazza

Member

Equipment
L4060 HSTC Loader, ZD326, ZD1211
Mar 9, 2016
778
24
18
Hyattstown, MD
My L4060 has the same hst intervals, and is what I am following. Some folks change both filters and fluid at 50h for break in concerns and peace of mind.
I wouldn't lose any sleep over it.


Sent from my iPad using Tapatalk Pro
 

Smokeless

Member

Equipment
3901/Loader/Rear Blade/Box Blade/LP Mower/Pallet forks IH M,,Cub & sickle mower
Feb 5, 2018
237
9
18
Southern Illinois
Thanks folks, believe i will hold tight to my manual. Oil looks great. At 101.5.....all ok. Maybe at 200, 400 for sure.

Being a 40's and 50's Farmall guy, this tractor is a huge blessing

Thanks for replies
 

rtallichet

Member

Equipment
3901HST-FEL, box blade, backhoe, grapple, rake, forks, piranha bar stump grinder
Dec 11, 2017
37
4
8
Texas
My operator manual indicates transmission filter change at 50hrs, then every 200.

Popped in to the dealer and told them i changed engine oil/filter and transmission filter. Was immediately asked if i changed transmission oil. I said no, manual only instructed to change filter at 50hrs.

I am getting mixed signals. Is there a mandate by Kubota to change hst transmission oil at a certain time?

Thanks
My manual schedule reads after first 50 then every 400 thereafter
 

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,817
2,830
113
Virginia
No issue with not doing it at 50 hr. It's not like engine oil that suffers a lot more during initial use. There are no combustion byproducts and fuel contamination and no high speed wearing in of parts. I would almost be willing to bet there is no discernable difference between new and 50 hour old hydraulic oil.