B20 direction valve leaking

[Zac vv]

Hello,

My first post on here but figured yoy guys would maybe be able to get me off to the right direction.
The directional valve on the tractor is pissing out oil especially wheb uts warmed up and on high rpm.

Is there any o rings or anything I should be looking at to fix this?

 

[TheOldHokie]

Number 70 ( 04811-00090) is listed as a "ring". Other than that no seals

Dan

 

[Zac vv]

Number 70 ( 04811-00090) is listed as a "ring". Other than that no seals

Dan

View attachment 83283

Thanks
But not sure it seems to be from these two that just have a brass washers.

 

[PoTreeBoy]

Thanks
But not sure it seems to be from these two that just have a brass washers.

Tighten them or replace the copper washers.

 

[Zac vv]

Thanks.
Looks like the washers are needing to be replaced. Is there a way to order specific washers ? Is there a good websiteni could use? No dealers near by

 

[TheOldHokie]

Thanks.
Looks like the washers are needing to be replaced. Is there a way to order specific washers ? Is there a good websiteni could use? No dealers near by

Ordinary copper sealing washers - take them to NAPA or similar store and match them up.

Dan

 

[Zac vv]

Perfect.

Hopefully this solves the issue

 

[Zac vv]

Hello
Cant seem to find any copper washers anywhere in my local small city. How did you find that diagram of the parts? im looking on the kubota website not having much luck.

Also on the diagram you posted 310 bolts have a hole that is obviously for the hydraulics to flow uo the line but does the orientation of that hole need to line up with the lines?

Hope that makes sense? Seems like out of everything i own i can find way more information online compared to this tractor

 

[TheOldHokie]

Hello
Cant seem to find any copper washers anywhere in my local small city. How did you find that diagram of the parts? im looking on the kubota website not having much luck.

Also on the diagram you posted 310 bolts have a hole that is obviously for the hydraulics to flow uo the line but does the orientation of that hole need to line up with the lines?

Hope that makes sense? Seems like out of everything i own i can find way more information online compared to this tractor

Copper sealing washers at an auto parts store or online. The bolts do not have to align with anything.

Dan