This is the levers but I put a slight bend in them so they are a little further apart.
I mounted my top and tilt valve here on the right fender where the handle holes are as i have a bad right shoulder.
This is the levers but I put a slight bend in them so they are a little further apart.
I mounted my top and tilt valve here on the right fender where the handle holes are as i have a bad right shoulder.
Your valve is one of the ubiquitous P40 designs that are made by a lot of different companies. Summit has changed vendors at least once in the last few years.
Your valve is one of the ubiquitous P40 designs that are made by a lot of different companies. Summit has changed vendors at least once in the last few years.