bbxlr8
Well-known member
Equipment
L2501 w/R14s, LA525, BH77, SGC0660, CL 5' BB, CL PHD, WG24 + Ford 1210 60" mmm,
Looking for some beginner tractor advice (B/LX + implements)
- Thread starter rcsracing
- Start date
If you decide on the b2601 or b2301 and you are not going to mow consicer ag tires you will save money and have better traction you will also not need spacers for tire chains at least I did not for the b 2301.
I am a bit s/w of Cleveland with the same needs as you minus driveway maintenance and I recently closed a deal for a LX2610. I have 11 acres and have about 100 downed trees from a tornado a few years back. They are at the rear of my property so I have only dealt with the ones that were “in the way” but I wanna get the rest cut and stacked this year. That was the main reason for the recent purchase. BTW I also have a zero turn for lawn maintenance.
I used to own a JD 2320 (25hp, about the size of a B series) that I used for similar tasks at a previous property. It was a workhorse and handled the tasks but I was pushing it pretty hard much of the time. That is what led me to the LX. I wanted something a size up from what I had.
My local dealer has gone above and beyond thus far. Delivery is later this week. The few places in the general area I have checked seem to have reasonable stock.
Good luck!
I used to own a JD 2320 (25hp, about the size of a B series) that I used for similar tasks at a previous property. It was a workhorse and handled the tasks but I was pushing it pretty hard much of the time. That is what led me to the LX. I wanted something a size up from what I had.
My local dealer has gone above and beyond thus far. Delivery is later this week. The few places in the general area I have checked seem to have reasonable stock.
Good luck!
One thing to consider with a front PTO driven snowblower is that when it's on, the loader is off. Changing those probably isn't fun in the summer, in winter....brrrrrrr. Hopefully others who do the swaps will say how long it takes. I'm getting too old to crawl around and get beat up by 'machines'.
I chose the 3rd option, a selfpowered SSQA snoblower. BERCOMAC is one company that makes them, spec and prices online. Yes, they're pricey 'off the shelf', but allow you to quickly and easily change implements. I bodged my own and of course not enough snow has fallen to test it,maybe $500 in parts(engine was the big purchase).
You should consider the snowblower a 'lifetime' investment,while not used daily it's a great implement to have.
I chose the 3rd option, a selfpowered SSQA snoblower. BERCOMAC is one company that makes them, spec and prices online. Yes, they're pricey 'off the shelf', but allow you to quickly and easily change implements. I bodged my own and of course not enough snow has fallen to test it,maybe $500 in parts(engine was the big purchase).
You should consider the snowblower a 'lifetime' investment,while not used daily it's a great implement to have.
I did this swap last week for the 1st time. Reading the manuals every step of the way and taking my time the blower was off and teh fel back on in around 35 minutes. I'm sure it will get quicker with practice.
Make sure you get SSQA on the front bucket so you can easily switch from bucket, to grapple, to pallet forks, etc. Option for the 3rd function so you can run a grapple. I just added a top hydraulic cylinder to my 3pt and that's really nice, so a top and tilt with a gravel drive or other grading chores is nice to have.
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
I am down in central Ohio on 25 acres about 1/3 is wooded. I have a B3200 pin on bucket that is used for snow removal, back blade and FEL along with brush hogging and drive maintenance with a box blade. Open station, loaded tires and wheel spacers. I have a canopy that I use when doing a lot of work, mostly it stays off so I can fit it in my garage with the rops down. For lawn care I picked up my BIL’s B1700 with a mmm. Old but reliable. Not the fastest but my lawn is quite uneven. I do wish I had the SSQA for the 3200 and May even put an aftermarket system on it. Not seeing the need for the grapple at this time since I cut my wood in to rounds and haul them out in the FEL. Would like to have some forks though. I do have Pats Quick Attach on the 3200. Makes easier work hooking up implements.
Snow removal. If I was in the snow belt, I would have a blower. For me most snows are a quick 30 min clear with the bucket and blade. We get a couple that take me 3+hrs to clear. Bonus seat time.
My next tractor will have a cab, rear remotes and front auxiliary remotes for future attachments.
Good luck with whatever you buy and if you are in the West Mansfield, Marysville area and want to grab some seat time to try a different size out, PM me
Snow removal. If I was in the snow belt, I would have a blower. For me most snows are a quick 30 min clear with the bucket and blade. We get a couple that take me 3+hrs to clear. Bonus seat time.
My next tractor will have a cab, rear remotes and front auxiliary remotes for future attachments.
Good luck with whatever you buy and if you are in the West Mansfield, Marysville area and want to grab some seat time to try a different size out, PM me
FYI, you can use Kubota part # B2366 SSQA loader brackets on the B3200. I converted my B3200 this way. You'll still have to purchase a bucket with SSQA or convert your factory pin on bucket to SSQA (which I did).
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
We had a terrible wind storm last night and today and lost many large spruce trees two across the driveway. So I used the grapple and the quick attach for the first time. Both are awesome the quick attach let me change over in a few minutes and I cleared the two trees across the driveway and moving the limbs and tops with the grapple took less than 1/2 the time of piling them on the loader.