Kubota L3010 wont move forward or reverse

[Walt in Gloucester VA]

I just bought a 2002 L3010 w/Hyrdostatic transmission.
The hoses for the bucket were shot so I replaced two 8 ft hoses.
I used the tractor for about an hour or so. I was pushing a tree stump into a burn pile as I tried to back up the tracor didn't move.
It won't move forward or reverse and if I push in the clutch I hear a whining/grinding noise. I took out a second mortgage to buy the tractor and have operated it maybe 3 hours in total.


Any help and advice is greatly appreciated.

Thanks

 

[cabu]

...and if I push in the clutch a hear a whining/grinding noise...

Hello, does the tractor loose oil?

Have you checked outside the gearbox for something broken?

Can you make more observations?

Or do you only have the strange noise and "no tractor-movment"?

Will you do the service and maybe open the gearbox or is it a friend/workshop?

carl

 

[Bluegill]

How's the fluid level?



This is one of the reasons I like gear drive tractors. I know that's no help, but I had to say it.

 

[bruceatlam]

Are you sure that the range selector isn't between ranges ---- sounds like it might be in between ranges.

 

[birddogger]

Are you sure that the range selector isn't between ranges

I was just gonna say that, you slam a stump into the pile, your elbow swings a bit and bumps the lever to neutral.

 

[Walt in Gloucester VA]

I was just gonna say that, you slam a stump into the pile, your elbow swings a bit and bumps the lever to neutral.

beautiful dog!!!!
Thanks for your help.
Yes, I've tried switching between H,M, and low

 

[Walt in Gloucester VA]

Hello, does the tractor loose oil?

Have you checked outside the gearbox for something broken?

Can you make more observations?

Or do you only have the strange noise and "no tractor-movment"?

Will you do the service and maybe open the gearbox or is it a friend/workshop?

carl

All the linkages appear to be functional and fluid is between1/2 ans 2/3 full